to amplify the input pneumatic signal
If you are talking about a pneumatic solenoid valve the function of it is to control the air in and out flow in a pneumatic actuator.
dfrere
One of the application of the control valve with positioner is that it is used to control the opening and closing of the actuator based on electric or pneumatic signals. The opening or closing of control valves is usually done automatically by electrical, hydraulic or pneumatic actuators.
The speed of a pneumatic motor is controlled by regulating the flow of intake air with a proportional control valve Paul Berbakov
positioners are used to control the opening or closing of the actuator based on Electric , or pneumatic signals
A valve which requires pressurised air to operate (open or close) is known as pneumatic valve. A valve has a valve base through which the media (could be be air, liquid, steam, gas...) flows and a actuator mounted on the base which helps operate the valve. This actuator could be of pneumatic type. (or elctrically operated motorised type)
Pneumatic process control valves are used in process industries to control the flow of fluid by using pneumatic actuators. It requires 4.5 to 6 Kg/sq. cm of pressure to operate the valve. Control room sends electrical signals of 4-20 ma to field where I/P converter converts these electrical signals into pneumatic signals. Actuators use these signals to operate the valve. Actuators moves the stem up and down depending upon input signals and control the valve opening. 4ma- 0% opening 8ma- 25% opening 12ma- 50% opening 16ma- 75% opening 20ma- 100% opening
actuator is a mechanism that will responds to hydraulic,pneumatic and electrical signal ,it is used to control the valve that to be in open or close condition.
This indeed harks back to the origin of the word "valve". A traditional (water) valve may be operated by the application of a few pounds of force, but may control the flow of thousands of pounds of fluid. [Which is why by analogy, thermionic amplifiers were called valves.] Similarly with pneumatic control valves, where a signal of a few pounds on a control piston will produce an actuating force of many hundreds of pounds.
Specialityvalve is one of the top-most Pneumatic Globe control valve manufacturer in India. They are mainly used in industries to handle or regulate water, air, steam, gas, oil and other fluids in processes having wide flow range requirements. Today, the market demand for installation and use of pneumatic control valves is huge, not only in industries but also in daily life. Pneumatic Globe Control Valve allows precise control of flow rates and speed of the system. It is a type of Globe valve that allow control of flow rate and speed in the system. Industries Oil and Gas Chemical Petrochemical Refineries Advantages Good ability to switch Simple structure, convenient production and maintenance Good ability for flow regulation Stroke for valve opening and closing is greater than Gate Valve Description Body material- Brass, Bronze, Titanium, Cast Iron, Cast Steel (A216 WCB, WCC, LCB, LCC, WWC6, WC9, CF8, CF8M), Cast Ductile Iron Class- 150 to 2500 PN10 to PN450 Size- ½” to 80” End Connection- Buttweld, socket weld, flanged, threaded Operation- Pneumatic actuated Specialityvalve is one of the best Pneumatic Globe control valve manufacturer in India
air pressure