go to autozone and have them run the code for free... otherwise it sounds like the TPS or ICV
It's at the front centre of engine ,just above the starter..
AnswerOn the 1992 Sable with either the 3.0L or 3.8L it is on the back valve cover (closest to the passenger compartment). It is harder to get to the PCV on the 3.8L engine. The actual PCV is connected to a rubber grommet on the engine valve cover and the other side PCV there is a hose that leads to another part of the engine.
10 degrees BTDC - according to motorcraft.com , one of Fords websites
typically the 1992 Mercury Sable can hold up to 16 gallons
According to one of Fords websites : For a 1992 Mercury Sable : The 3.8 liter V6 engine has spark plugs gapped at ( .054 inch ) The website does not show the 3.0 spark plug gap
No, a Generation 2 (1992-1995) Taurus/Sable Windshield will NOT fit a Generation 3 (1996-1999) Ford Taurus/Sable.
VERY BIG JOB!!!!!!!!!!!!! Must drop engine cradle and support engine, tranmission comes out the bottom, recommend taking to pros. Can be done on with out lift but VERY HARD.
You must scan the computer to find out the code first Go to a qualified mechanic for a diagnostic
P205/65r15
Goof Troop - 1992 Pete's Day at the Races 1-39 was released on: USA: November 1992
Yes, it's on the top of the transaxle casing midway between engine and firewall, on driver side. You will see the trans cable coming to join it from the firewall.
The motor in a 1991 Accord is interchangeable with the engine in a 1992 Accord. They are only slightly different but will still interchange with no problems.