Try www.programyourremote.com
Don't really understand the question, look in your owners manual for answers.
Go here for instructions: http://www.programyourremote.com/
To program a 2005 Mazda Tribute remote, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within five seconds, turn the key back to "Off" and then back to "On" again. Repeat this process a total of three times, ending with the key in the "On" position. Press any button on the remote to complete the programming. The locks should cycle to confirm successful programming.
The 2005 Ford Expedition has a V8 engine.
The 2005 Ford Expedition has 24 valves.
To program a remote control for a 2005 Ford F-150, first, sit in the vehicle with all doors closed and the key in the ignition. Turn the ignition on and off eight times within ten seconds, ending with the key in the "on" position. The doors should lock and unlock, indicating the vehicle is in programming mode. Press any button on the remote to program it, and the locks will cycle again to confirm successful programming; repeat for additional remotes.
See FOB PROG (Remote Keyless Entry Transmitter Programming) on page 2-45 of your "Owner's Manual", under Section 2: Features and Controls - Vehicle Personalization.....
The back of the remote has the instructions. Press lock button and then the top button-Press for about 2-3 seconds car will start Don't over use - remote is built very cheap and sensor inside the remote breaks. Had to solder 3X
Where is the camshaft position sensor on a 2005 Expedition?
The 2005 Ford Expedition is a gas-powered vehicle.
The 2005 Ford Expedition has a 4-speed automatic.
The 2005 Ford Expedition's turning circle is 39.2 ft..