i have had this problem a few times but i know how to fix it. the problem most likely is that if you usually play with the RWY(red, white, yellow) cables and you have recently used it on an HDMI cable you have to switch it back to the standard cables. if you are trying to play on an HDMI cable and you usually use the RWY cables you have to first switch it to the HDMI settings. to do this first go to settings with whatever both cables plugged in. go to the option on your tv that matches your current settings and that matches the placement of the plugs(ex HDMI 1, HDMI2, Component, ect). when you can see the screen go to the settings section on the XMB(Cross Media Bar). Go down until you reach the display option and select it. now depeneding on what type of TV you are using choose the style of plug you are using(HDMI or Standerd). when you have done this the screen will go black. now you much change the input of your TV to the selection that you have choosed on your display screen(Component or HDMI). When you select the correct screen it should show back up. Now select everyone of the audio options and you will now have audio and display. if this does not work i would talk to a tech expert or the SONY tech support.
Someone answer this please. I have an 03 sierra and don't know if I have a problem or if it's just time for maintenance.
sorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computer
check with the dealer for the reset codes.
The check engine light problem will have to be repaired in order to have someone with a scanner to reset it. If the repair is not made then the light will come back on immediately.
There is no need to reset it there is way to reset it if the valve is a problem it has to be replaced I think there is another problem but I have no way of knowing what it could be
iT WILL RESET WHEN THE PROBLEM IS REPAIRED.
the light will reset itself when the problem is fixed, therefore the problem has not been fixed. take it back! As an alternative to waiting for the system to decide the problem is fixed you could plug an OBD II reader into the port under the dash. The reader can be used to turn warning lights off and reset the system. Note, as mentioned above, if the problem isn't really fixed the light will come on again.
You have a problem with the abs system. Once the problem is fixed the light will reset itself.
app error 205 reset problem blackberry 8310
One way is to disconnect the battery cable for 5 minutes or so. That will reset the light on a lot of vehicles. If that doesn't do it, you'll have to take it to someone with a diagonstic computer.
Try to unplug your modem. Wait about a minute and then plug it back in. That will reset it, and probably fix the problem.
Repair the problem and it will reset.