You are going to need
- A hooked probe, or a really tiny flat head screwdriver
- A Philips head screwdriver.
Use your probe to take the black trim piece surrounding your radio off (its held in by a clip on either side) by simply popping it out
Behind that there are 4 Philips head screws holding the radio in on the bracket, take those out and unplug the wires on the back and your golden.
Refer to your service and user manual on how to change an alternator ground wire on a 1994 Mitsubishi 3000 GT.
it is located behind the radio
boo
To remove the seats in a 1994 Mitsubishi 3000 GT, first, slide the seat all the way forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. After removing the rear bolts, slide the seat back to access and remove the front bolts. Finally, disconnect any electrical connectors for power seats or seatbelt sensors, then carefully lift the seat out of the vehicle.
Call the dealer
Call a Mitsubishi dealership and give them the serial numbers from the vehicle it was in and the serial numbers on the radio and they should be able to give you the codes needed.
They don't have one. They were added post 1996.
If im not mistaken its on the rear towards the right
On a 1994 Mitsubishi 3000 GT, the fuel pump is located inside the fuel tank. To access it, you typically need to remove the rear seat cushion and then the access panel on top of the fuel tank. Alternatively, the entire fuel tank can be dropped for more comprehensive access. Always ensure the fuel system is depressurized before attempting any work on it.
i have a 1994 Mitsubishi 3000 gt and when the temperature hand starts to go up the car dies what would cause this to happen
its located underneat the dashbourd on passenger side consule panel.
Please define what you are looking for. Is it An AC question? What does it do Ray