Removing car battery for 2005 Acura RSX?

Answer 1

It's not that hard but you need a few tools. The bracket on the top ledge need to be remove and so does the battery plugs on the pos. and neg. This is how i remove mine. First remove the neg. cord on your battery then follow to the pos. Make sure you dont touch it with any metal after you remove it. Second use a socket 10 mm to remove the black bracket that is mounted onto the front of your car. Third Use a long open gap 10mm that can reach the other bolt behind the battery that the bracket is attached to. :note: This is a long screw so do not remove the whole bolt out of it or the whole screw will drop down your car. or you could hold on to the screw and take it all out depend on how you want it. fourth when it is loosen enough or the bolt is taken out, remove the long screw if you havent dont so. Fifth take out the plastic holding on the battery. "It's the black piece outside covering the battery not the battery holder" after these your battery should be free to take out. to put it back on reverse the steps and it should be fit just like how it was taken out. Note: There is a small bout .5 inch hole behind the battery on the battery holder that you have to put the long screw back on to hold the battery tight again.