You need a special harmonic damper puller. It's a variant of a basic 3-jaw puller
that it made stronger so that it wont break.
You have to purchase a special pulley puller from Dodge, other wise you will break the pulley when you try to pull it off.
no
The crankshaft pulley is the large pulley on the lower passenger side of the engine.
the crank shaft is at the very bottom of your engine the quickest way to get to this is by removing the oil pan
the crankshaft sensor is located behind the crank pulley. the bottom pulley
You have to remove the bolt on the pulley, then use a appropriate puller, to pull it off, just remember you need an insert(at least 4.5 to 5" long) that goes inside of the hole that pushes against the crankshaft. The puller has to push on this insert
You need to get a special harmonic balancer pulley. You can rent them from AutoZone for $70 (you get it back when you return it)...a normal harmonic balancer pulley WILL NOT work. Chrysler vehicles have their own pulley. It's a fairly simple procedure once you have the right pulley.
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.
The crankshaft pulley has broken causing the outer ring to slide forward into the fan assy. replace your crankshaft pulley and all will be well
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
The crankshaft pulley is the lowest pulley on the engine. Looking at the engine from the front which is looking at it from the passenger side fender the crank pulley is on the bottom of the engine and has a pulley with a pulley behind it with teeth on it.
Power steering belt to crankshaft pulley. Alternator belt to water pump pulley and to crankshaft. A/C compressor belt to power steering pump and to crankshaft pulley. Smog/Air pump belt to water pump pulley. This is for a truck that had a 2 grove power steering pulley, a 2 grove water pump pulley and a 3 grove crankshaft pulley................