0
To remove the expansion valve on a 1994 Toyota Paseo, first ensure the air conditioning system is fully evacuated to prevent refrigerant release. Then, disconnect the necessary components, including the refrigerant lines and electrical connections. Afterward, unbolt the expansion valve from its mounting location and carefully pull it out. Finally, replace it with a new valve, reassemble the components, and recharge the A/C system.
What else can I help you with?
Where is the expansion valve on a 1990 Toyota pickup?
Do you mean the expansion valve for the A/C? That is near the evaporator under the dashboard.
What other Toyota's car egr valve will work on my 1996 Toyota Paseo?
I dont know what other egr valve will work, but I know they can be cleaned out and put back on the car. I have a 96 Paseo, and I soaked mine in carb cleaner and was able to get all the carbon out and put it back on the car and works fine.
What is the location of expansion valve for Toyota supra?
for a 86-1/2 to 92 supra, the expansion valve is located in the evaporator case. mike b.
Where is expansion valve on 1997 caravan?
Inside the hvac housing inside vehicle.requires removing dash and hvac housing to get at evaporator,and then replacing expansion valve!have fun.
Where is the location of the expansion valve on a 1993 Toyota pickup truck?
YOU MUST REMOVE THE EVAPERATOR CASE FROM INSIDE THE TRUCK ON THE PASSENGER SIDE AND YOU WILL SEE THE EXPANSION VALVE.
Where is the expansion valve located on a 2002 Toyota Highlander?
On a 2002 Toyota Highlander, the expansion valve is typically located within the vehicle's dashboard, specifically within the HVAC (heating, ventilation, and air conditioning) system. It can be found near the evaporator core, which is often accessed by removing the dashboard and some associated components. For precise location and access, consulting the vehicle's service manual is recommended.
1994 Toyota Paseo stalls out when idling in traffic?
Could be EGR valve sticking open or dirty at an idling condition or hesitates when accelerating.
How do you remove the valve cover on a 1993 Toyota Paseo?
To remove the valve cover on a 92-97 Toyota paseo. Remove the spark plug igniters from valve cover. Remove crankcase ventilation valve(black plastic 90 degree elbow) from valve cover and intake manifold. remove the fiev nuts on th top o the valve cover. place a pry bar between cylinder head and valve cover at the corners where they have left a gap. Pry slowly and easily. be sure to work all corners not just one.
Where is the idle air control valve located in a 1993 Toyota Paseo?
It's directly underneath the throttle body and anchored to the throttle body by screws.
How do you Install an Expansion valve on a 1994 Toyota Land Cruiser?
To install an expansion valve on a 1994 Toyota Land Cruiser, first, ensure the A/C system is fully discharged. Remove the A/C lines connected to the old expansion valve, then detach the valve itself from its mounting location. Install the new expansion valve by securing it in place and reattaching the A/C lines, ensuring all connections are tight to prevent leaks. Finally, recharge the A/C system and check for proper operation.
What is the location of the expansion valve for a Toyota supra?
In a Toyota Supra, the expansion valve is typically located within the evaporator core assembly, often found behind the dashboard. It is part of the vehicle's air conditioning system and helps regulate the flow of refrigerant into the evaporator. Accessing it may require removing the dashboard or other components, depending on the specific model year. Always refer to the service manual for precise location and removal instructions.
The location of the expansion valve for a 97 Toyota Camry and if behind the dash do you have to pull the dash out?
The expansion valve is located on the passenger side of the vehicle behind the dashboard. To gain access to it you will have to remove the glove box and the dash.
