for a 86-1/2 to 92 supra, the expansion valve is located in the evaporator case. mike b.
In a Toyota Supra, the expansion valve is typically located within the evaporator core assembly, often found behind the dashboard. It is part of the vehicle's air conditioning system and helps regulate the flow of refrigerant into the evaporator. Accessing it may require removing the dashboard or other components, depending on the specific model year. Always refer to the service manual for precise location and removal instructions.
YOU MUST REMOVE THE EVAPERATOR CASE FROM INSIDE THE TRUCK ON THE PASSENGER SIDE AND YOU WILL SEE THE EXPANSION VALVE.
There isn't one
passenger side firewall. behing black charcoal canister, a foot from the hydraulic hood support.
you can adjust it via the idle control valve.
The expansion valve is located on the passenger side of the vehicle behind the dashboard. To gain access to it you will have to remove the glove box and the dash.
Do you mean the expansion valve for the A/C? That is near the evaporator under the dashboard.
To remove the expansion valve on a 1994 Toyota Paseo, first ensure the air conditioning system is fully evacuated to prevent refrigerant release. Then, disconnect the necessary components, including the refrigerant lines and electrical connections. Afterward, unbolt the expansion valve from its mounting location and carefully pull it out. Finally, replace it with a new valve, reassemble the components, and recharge the A/C system.
To install an expansion valve on a 1994 Toyota Land Cruiser, first, ensure the A/C system is fully discharged. Remove the A/C lines connected to the old expansion valve, then detach the valve itself from its mounting location. Install the new expansion valve by securing it in place and reattaching the A/C lines, ensuring all connections are tight to prevent leaks. Finally, recharge the A/C system and check for proper operation.
The expansion valve on a 2010 Toyota Tacoma is typically located near the evaporator core inside the vehicle's cabin. To access it, you usually need to remove the dashboard and the HVAC unit. It's important to refer to a repair manual for specific instructions, as the process can be complex.
Where is front expansion valve for chevy suburban 1997
its right beside the wiper switch