The check engine light comes on to notify the driver that there is an issue. To reset the light, it is best to take care of the issue, or use a scanner that will clear any possible codes.
That REQUIRES an ENGINE SCANNER to do that.
unplug your battery for 15 minutes and it will go off
You use a scan tool after repairing the cause of the code that turned the light on.
After reading the codes with a scanner, and repairing the cause, you clear the code with a scanner
check the owners manual or the easiest way is to go to your local autozone and use their scanner tool to reset the light
Disconnecting the negative terminal on the battery for 2 minutes will reset the check engine light, but if the problem that caused it to turn on originally still exists, it will come on again.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
It requires an OBDII engine scanner to reset the light. If you don't fix the problem that made it come on, then it will not do any good to turn it off. You need to have the engine scaned to see why it came on to start with.
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
That requires an OBDII engine scanner to clear the codes / turn light off. But if you have not FIXED the problem that made it come on then it will just come on again. Have engine scanned.
when you disconnect your battery and reconnect it will reset cumputer