After repairing the cause of the code, you can clear it with a scan tool.
To reset the 'check engine' light on a 2001 Cavalier, you can disconnect the car's battery by removing the negative terminal for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-II scanner to clear the codes directly. However, it's important to address any underlying issues that caused the light to come on before resetting it.
1. To reset the check engine light on your Chevy Cavalier, this is what you have to do. First, open the hood to the car, then turn the retaining nut on the battery’s negative cable clamps counterclockwise. Remove the cable clamp off the negative battery terminal by sliding it. Leave it unconnected for 5 minutes and then reconnect. Turn the ignition on and the check engine light will reset itself by blinking a few times and then shutting off.
Get the Engine Checked Don't waste your money getting your engine checked. Just disconnect your negative side of your battery for 10 seconds. Reconnect it and your done, no more check engine light.
disconnect the negative battery cable for 30 seconds and hook it back up.
Take off the + on battery for 10 sec that should clear the code.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
ss
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
ets and check engine light on in 98 Chevy cavalier
hoe do you reset the check engine light in a 1995 land rover
how do i reset the check engine light on a 1999 acura 3.2tl