There's little choice. Conductors (not 'cables') sag, because of their weight. However, there's also a practical reason for deliberately allowing conductors to sag; if they were too 'tight', then they would not be able to contract during cold weather without pulling the poles over.
became sag loosen
To droop is to hang loosely or sag. There is no volume associated with it.
Two reasons: 1. It almost impossible to pull a wire tight enough that it is straight. 2. The sag also can "give" a little if the wires shrink to to cold. If they could not "give" a little, then they would simply break.
Overloading would be one reason. Or the wood moisture content was too high when installed and it has bowed as it dried out. If this relates to old construction, there could be insect (termite) damage or rot that has weakened the member.
Century 8 in North Hollywood, Los Angeles As of 05/28/10, this theater no longer accepts SAG cards for movies.
sag
SAG
The past tense of sag is sagged.
The sag setting is necessary because it is physically impossible to have a suspended line with no sag. The sag is specified because there has to be a minimum clearance value for the height above ground at the centre of the sag where the cable is at its minimum height.
Sag lasers measure distance.
Ivan Sag was born in 1949.
Not according to the SAG website. Yes they are according to the SAG Website....
The address of the Sag Harbor Whaling Museum is: 200 Main St, Sag Harbor, NY 11963
The address of the Sag Harbor Historical Society is: Po Box 1709, Sag Harbor, NY 11963-0062
The address of the Serve Sag Harbor Inc is: Po Box 775, Sag Harbor, NY 11963-0019
You can get a SAG membership card upon appearing in a film, and applying for the card. SAG cards can also be awarded to extras, and once dues are paid, the SAG card will be given.