Want this question answered?
fire tubes or water tubes
Steam boilers work by boiling water to generate steam. The steam then is used to heat the engine.
It shouldn't be ideally, as hard water deposits limescase (a solid) in the boiler
dimineralised water is also preferable to tap water for use in model steam engine boilers and model engines of other types. Mineral build-up resulting from the use of tap water in model boilers can severely reduce the efficiency of the boilers if run for long periods. This build-up is called boiler scale.
boilers which are used in ships called as marine boliers.
steel, copper and iron are the materials that are used in boilers.
needs the oxygen removed in the distilling process to boil in the boiler
A steam generator is simply a heat exchanger that is commonly used to change water into steam. This can also be described as low water content boilers.
Water tube boilers are used in marine and stationary applications. A water tube boiler heats by water flowing through tubes and being heated by fire externally.
3
A boiler is used to boil water, but many boilers work at high pressure so the temperature could be up to about 300 degrees C. Boilers are usually fed with oil that is heavier than diesel, while diesel is used to fuel diesel engines.
The boiler industry distinguishes between domestic and commercial boilers. A boiler is considered domestic if it is with the range of a 70 kW maximum limit. Any installation above 70kw is considered commercial. This is measured by the installation as opposed to the range of an individual boiler. An installation of two 50kw boilers which are connected to the same system is considered to be a commercial installation as the total amount of kW is higher than 70.