Send the mixture trough a filter, which would leave the sand back, then use a simple seporatory funnel to separate the sugarwater from the oil since oil doesnt mix with water.
Finnally destillate the solution to get water and sugar (or caramel if you heat it up too much).
if you don't need the water you can also simply heat the sugarwater in a pot till all the water is vapourised.
Firstly, water is to be added to make sugar water solution. The the total mixture of sand and sugar-water solution is passed through filter paper. The sand separates out and sugar water solution is collected in a vessel. Then by evaporating sugar is collected.
Soluble in water, sand is not.
You place the salt / sand mixture in warm water. The salt will dissolve in the water and you than then four the salt solution off the sand, leaning just sand. Then boil the salt solution untill all the water evaporates, leaving the salt.
Pour water into the mixture, let the salt dissolve.Then, put the wet-salty water-sand mixture through a sifter/filter.Take out the sand from the filter and dry it. COMPONENT 1 - SANDBoil the salt water solution and evaporate the water. The residue will be salt. COMPONENT 2 SALTDissolve the mixture in water first, before filtering the resultant solution. The residue is the sand, while the filtrate is the salt solution.
Salt is soluble in water where as sand is not. Using a fine paper filter in a funnel the salt can be removed from the sand by rinsing the mixture with water and then the salt can be retreived by evaporating the water. Hope I'm not doing your homework for you
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
Dissolve the sugar in water and then evaporate the water
Filter the mixture -- sand will not pass thru. Evaporate the water --- sugar will remain.
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
Place the mixture of sand and sugar in warm water, then stir.Allow the sand to settle to the bottom, then remove using a sieve.Boil off the water and collect the sugar.
Yes!!!! Put the mixture in water. The Sugar will dissolve. The Sand will remain solid. Then filter. The sand will be trapped in the filter paper, and thr dissolved sugar will pass through the filter paper. The regain the sugar crystals., gently heat and evaporate the water of solution. and sugar crystals will reappear.
water and a magnet
Add water and dissolve sugar in it.Attract the Nickel particles using a magnet.The left out is sand.
you cant it just separate one another still contain it though
To separate a sugar and sand mixture, there are two methods. The first is to slowly heat the mixture until the sugar melts. The second is to put the mixture into a solvent, such as water, where the sugar will dissolve, leaving behind the sand.
You could try running water through it (which would dissolve the sugar), collecting the water, and evaporate it to get the sugar back.
If you meant, how could you separate a mixture of sugar and sand, then you can disolve sugar in water, filter the sand out of the sugar water solution, then evaporate the water to get the sugar back by boiling it.