water and a magnet
You can separate the components of the mixture by using a magnet to separate the iron filings from the sawdust and sugar. You can then use a sieve to separate the sawdust from the sugar based on particle size differences.
Yes - First, you pour water into the mixture, and mix thoroughly. The sugar will dissolve into the water, but the sawdust won't. Then you get filter paper and make a cone with it (fold it into a quarter then push at the sides), then put it in a funnel and put that in a beaker/pot (depends on amount of mixture). When all of the water has drained through the paper, you will be left with sawdust on the filter-paper and sugar-water in the beaker-pot. To separate the sugar from the water, heat the water up until it has all evaporated, leaving sugar crystals in the pot/beaker.
You can use the property of solubility in water to separate sugar from a mixture. Since sugar is soluble in water, you can dissolve the mixture in water and then use filtration or evaporation to separate the sugar from the other components.
One way to separate sugar from a sugar and water mixture is through a process called evaporation. By heating the mixture, the water will evaporate, leaving the sugar behind. The sugar can then be collected once the water has completely evaporated.
You can use a magnet to attract and separate the iron fillings from the sawdust. Place the magnet in the mixture and move it around to attract the iron fillings. The sawdust will not be affected by the magnet and can be separated from the iron fillings.
You can separate the components of the mixture by using a magnet to separate the iron filings from the sawdust and sugar. You can then use a sieve to separate the sawdust from the sugar based on particle size differences.
Use a magnet to separate the iron filings, filter the remaining sawdust and sugar water solution, evaporate the water from the sugar water solution.
1. Salt will dissolve in carbon disulphide 2. Now we have a mixture of iron filings sugar and carbon disulphide(salt dissolved in it) 3. Separate iron filings by magnet. 4. Remove the sugar by Decantation process. 5. Separate carbon disulphide and salt by distilation.
Yes - First, you pour water into the mixture, and mix thoroughly. The sugar will dissolve into the water, but the sawdust won't. Then you get filter paper and make a cone with it (fold it into a quarter then push at the sides), then put it in a funnel and put that in a beaker/pot (depends on amount of mixture). When all of the water has drained through the paper, you will be left with sawdust on the filter-paper and sugar-water in the beaker-pot. To separate the sugar from the water, heat the water up until it has all evaporated, leaving sugar crystals in the pot/beaker.
To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.
Use a magnet
Put a small amount of the mixtureon paper Put a magnet underneath Swirl the mixture around so magnet gets filings Tip paper so sugar goes into a container Remove magnet so filings go onto a separate container May need to repeat in case some is missed
pepper actually floats only some goes to the bottom in a water solution so after that you would need to filter the pepper and sawdust because it is larger and then evaporate the water.
we can separate it by magnetic separation..(use a magnet and iron gets separated)
mixture 100% sure
You can use the property of solubility in water to separate sugar from a mixture. Since sugar is soluble in water, you can dissolve the mixture in water and then use filtration or evaporation to separate the sugar from the other components.
pepper actually floats only some goes to the bottom in a water solution so after that you would need to filter the pepper and sawdust because it is larger and then evaporate the water.