0
What else can I help you with?
Why the dominant color of a nonluminous flame on a Bunsen burner blue?
The dominant color of a nonluminous flame on a Bunsen burner is blue. Whereas, the dominant color of a luminous flame on a Bunsen burner is orange.
Should a luminous or non luminous Bunsen flame be used for heating in the laboratory and why?
Non-luminous flame should be used for heating in the laboratory because the flame is steady and produce little or no soot.Non-luminous flame is very hot thus, it is recommendable to use for laboratory purposes.Luminous flame is unsteady while non-luminous flame is steady.Another reason of using non-luminous flame because the flame of non-luminous is blue, and not visible unlike the luminous flame which is yellow in colour and visible.
Which flame is not suitable for heating in Bunsen burner?
The yellow flame (or luminous flame) should not be used because 1. It is less hot that the blue flame (or non-luminous flame) 2. It produces soot, as compared to the blue flame which is the clean flame
What are the two kinds of flames produced by Bunsen burner?
The two kinds of flames produced by a Bunsen burner are the luminous flame (yellow flame) and the non-luminous flame (blue flame). The luminous flame is cooler and produces soot, while the non-luminous flame is hotter and ideal for heating and sterilizing.
What is another name for the Bunsen burner?
you would use the safety flame when not heating anything because the blue flame is for heating because its hotter than yellow.
Which bunsen burner luminous or non luminous flame used in laboratory and why?
A non-luminous flame is typically used in laboratory settings when using a Bunsen burner. This flame produces a more controlled and homogeneous heat source, making it ideal for processes like heating, sterilizing, and combustion analysis. The non-luminous flame also produces less soot and is more energy efficient compared to a luminous flame.
What is the non luminous flame on a Bunsen burner used for heating?
The non-luminous flame on a Bunsen burner, also known as the blue flame, is used for heating because it produces a high-temperature, clean, and efficient flame. This type of flame provides a consistent and focused source of heat that is ideal for tasks like sterilizing equipment, melting solids, or conducting chemical reactions.
Why is a Bunsen burner not used for heating when the air hole is closed?
When the air hole is closed, the flame is a luminous flame. This flame is not ideal for heating for the following reasons: it is not as hot as the non-luminous flame it is very unstable it produces a lot of soot thus, only non-luminous flames (the blue one) is ideal for heating. :)
What is appearance of a flame that is used for heating?
luminous
What colour is the Bunsen burner safety flame?
Yellow/Orange. The blue one is harder to see and hotter.
Is the temperature of a luminous flame greater or less than that of a nonluminous flame?
a non-luminous flame- when the air hole of the Bunsen Burner is open"when the air hole is open, more oxygen can enter the burner; therefore, hotter flame will be produced."its color is transparent or blueBlue flames are the hottest flamesa luminous flame is produced when the air hole is closed.."if the air hole is closed, oxygen cannot enter the burner; therefore, least hotter because the combustion is not fully complete with least oxygenA luminous flame has an outer of orange color and an inner of blue.Luminous flames emits more light than non-luminous flames.three things to produce flame1.fuel2.oxygen3.friction or source of sparkLuminous objects emit light. The sun is luminous; the moon is non-luminous.
What is the name when the air hole is closed on a Bunsen burner?
The name is a "safety flame". This is when the air hole on the Bunsen burner is closed, resulting in a flame with a yellow, sooty appearance. It is used for low-temperature heating applications.
