Want this question answered?
It should remain closed initially while the air con cools down the room, then opened after the room is cool. This allows a small amount of fresh air to be brought inside to stop the air from getting stale if it is open when the air con is first turned on it just takes a bit longer to cool down the room
In order to illuminate the light, you need a closed circuit. It would be normally open, and closed to indicate that the door is open.
It is a contact block with three poles. Pole one is normally open, pole two is normally closed and pole three is normally open. These reading are taken in a de-energized condition. When energized the contacts will change status to closed, open and closed.
It depends. Which is more corrupt? -- An open loop or a closed loop? Whichever one is more corrupt, selfish, and greedy, then that is the one that befits attorneys.
The term normaly closed means that in its normal state the relay or contact is closed. So when energized it will open and break the circuit.
-intake: exhaust closed, intake open -compression: exhaust closed, intake closed -combustion: exhaust closed, intake closed -exhaust: exhaust open, intake closed
keep it closed the windows .but if need fresh air from outside , open the windows.
It should remain closed initially while the air con cools down the room, then opened after the room is cool. This allows a small amount of fresh air to be brought inside to stop the air from getting stale if it is open when the air con is first turned on it just takes a bit longer to cool down the room
No. Air conditioners should not be vented into a closed garage (even if there is an open window). Heat buildup poses increased risk for fires.
While running your air conditioner, the vents should be closed so that warm air from out side do not enter into the room,which may cause damage to the machine in the long run and it will fetch more time to cool the room.
No. While the air conditioner is on, keep the windows closed to keep the cool air from escaping to the outside.
Closed
closed system
open
Open
which electric element should be used so as to open the closed electric circuit
Closed