no
ignition will be turned off and keys left in ignition, transmission placed in park (automatic) or reverse (manual), parking brake set, parking lights/emergency flashers on
Yes, and set forks flat on ground
Set the parking brake, the DRL should go off.
reverse and set the parking brake.
Set your parking brake before you turn on your ignition. This cancels out your headlights.
set the parking brake, turn off the ignition switch and put the vehicle in low gear if your transmission is standard, and park, if it is automatic. The wheels should not be over twelve inches from the curb.
False
The parking brake is set by pushing, with your foot, the parking brake pedal on the left side of floor area. It is released by pushing with foot again.
Turn your wheels heal toward the curb, set the parking brake. This way, if the brake fails and transmission slips it will not roll into traffic.
To set the parking brake on a Kawasaki Mule 550, first ensure the vehicle is in a stationary position. Pull up the parking brake lever, located between the driver's seat and the center console, until it is fully engaged. You should hear a click indicating that the brake is locked in place. Always check that the brake is securely set before leaving the vehicle.
You should always set the parking brake no matter where you are parked.
Turn you front wheels to the right and set your parking brake.