yea,but some don't
The radio time would stay on if you had the keys in the ignition but the ignition was only turned halfway.
Yes. If you remove the radio, the clock will simply show the current time and date. Beware, though, when I changed my radio, the clock's software went crazy and it stopped updating the clock. That means that when I turned the car on, it would show me the correct time, but then it wouldn't advance until I turned the car off and on again. This was fixed by unplugging the battery thereby resetting the clock's software.
The duration of Pacific Time - radio show - is 1740.0 seconds.
With the key turned on, and the radio turned off, you press the SET button, then use your seek and scan buttons to set the time.
Pacific Time - radio show - was created on 2000-11-16.
Pacific Time - radio show - ended on 2007-10-11.
The Joe Scarlborough Radio Show has no affiliates at this time.
On the clocks there should be 2 black knobs to reset trip etc. turn ign on and the right hand knob when turned clockwise ( it can be tight) should change time on dash and on stereo at the same time mate
if its the same as the 99 press in the volume knob, this will change between time and radio station
It displays on the factory radio. There is a button on the OEM radio to either show the time or radio station.
sounds like the memory wire and acc wire are backwards
With the radio turned off, you press the SET key, then using the Volume and Tune buttons, you set the time. Once set, press the set button, and your done.