yes, to prevent damage to internal components such as pipes, electrical wiring, gas lines, and ducts
Interior walls do not need to be braced for wind load or shear. They need to be fastened at the top and bottom plates. Drywall does act as bracing for racking of walls when it is applied. It does not however substitute for code required exterior or interior shear walls.
Interior closet walls are typically non-load bearing walls.
Non-load-bearing walls support only themselves; they are interior partition walls. They have a single top plate. While non-load-bearing walls might run perpendicular to floor and ceiling joists, they will not be aligned above support beams. As the name implies, load-bearing walls carry the structural weight of your home. Load-bearing walls in platform-frame homes will have double top plates. That is, two layers of framing lumber. Note: all exterior walls are load bearing; I got this from another site.
Interior architecture is simply the design of the interior of a building or structure. Where as interior design deals with how pretty it is and architecture being the design of the overall structure and the exterior, a logical conclusion would be the structural design of the interior walls and/or style."Interior Architecture bridges the practices of interior design and architecture so that professionals working in the field have a structural and load bearing education with an emphasis on interior spaces. The field is similar to architecture in that it deals with structures and load bearing walls. It is similar to interior design in that it focuses on interior spaces."1____________ 1 Wikipedia
LOAD BEARING WALLS Walls that must support the dead load of their own weight and the weight of subsequent bearing structural members placed upon them. In addition, load bearing walls must be capable to carry the load of "live" loads that are anticpated to be placed upon the the system without deflection that can degrade or negatively impact structural intergrity. NON LOAD BEARING Walls that are only intended to support themselves and the weight of the cladding or sheathings attached. Non load bearing walls provide no structural support and may be interior or exterior walls. Non load bearing walls must be braced to resist minimum 5 psf lateral loads.
form_title=Carpentry Framing Repair form_header=7253 What framing type or types do you need repaired?*= [] Floor [] Non-bearing interior walls [] Load-bearing interior walls [] Exterior walls [] Wall sheathing [] Ceiling joists [] Roof framing [] Stairs [] Other Is the repair needed a result of dry rot or water damage?*= () Yes () No () Don't Know
All exterior walls in a home are load bearing. The exterior walls on the gable end of your house do not bear much load, but the walls that the hip of the roof bear on carry your roof and ceiling joints. Interior walls are another story. Usually in a smaller one story home there is a wall that runs the midspan of the house that is load bearing for your roof and ceiling joints.
If you plan to move or modify any of the home's bearing walls (any exterior walls and some interior walls, based on the original engineering), you should have your original home plans reviewed by an engineer. If you do not have the original plans, have an engineer do an on-site review. He/she will be able to let you know what walls need to stay, and what you can do to modify any bearing walls. As for changing any non-bearing walls, the biggest obstacle is in the existing plumbing or electrical wires in the walls. All of these can be properly addressed by a licensed contractor. Also, chances are you will need to submit to your municipality for a permit. Go to their website and they should have permit information available. This can be a do-it-yourself project for those who know how! Good luck!
One must use caution when removing walls, some walls are load bearing. Other items you will find in walls are electrical, and plumbing.Ans 2 -providing you are sensible and careful this can be done -I've personally done many.
If is an exterior wall, insulation, otherwise bare studs walls are fine.
No. They are partition walls.
Non load bearing walls are walls that the weight of the roof is not supported on. Any wall that runs parallel will roof joists will be non load bearing.
The only reason that I have heard of for insulating interior walls was for sound deadening efforts. There is no heat gain or loss advantage to insulating interior walls.