0
Should you enter onboard or pci for primary video adapter in system bios?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can the battery in a 2000 Lexus LS400 be changed without going to a garage or dealership?
yes, but you need an adapter that plugs into the cigarette lighter. attached to the adapter is a 9volt battery. plug that into the lighter before disconnecting the cables to the car battery. that adapter w/ the 9 volt battery attached to it will keep just enough voltage in the cars computer system to allow you to change the cars battery. w/o that adapter when you disconnect the old battery and reconnect the new battery the cars onboard computer system will default and blow several fuses. go to an auto parts store and rent the adapter for a few bucks.
My computer monitor doesn't come on when i turn my computer on. the monitor says no vga input and goes to sleep. what's the problem with my computer?
First, check your connections between your monitor cable to your VGA socket. BIOS setting, if you know how to configure it may help but if only your screen projects it. Sometimes it's a driver issue, a conflict between your current operating systems (i.e. "Windows" , "OSX" , "Linux") and the program that tells your system how to interact with plugged-in components such as monitors. Typically, this only affects the advanced features availability of the hardware, not the basic functionality so it would most likely still operate to some extent in the event of a driver conflict. In this case, however, you're probably experiencing a faulty graphics adapter, the hardware tech installed either on the motherboard or in a PCI slot on the motherboard. This is the hardware bridge between your monitor and system that determines, among many other things, the type of connection your monitor will use (vga, hdmi, usb, etc...) and graphics resolution. If you are using a PCI-based graphics adapter, ensure that it's seated properly in the PCI slot on your board. Also check your system specifications (manual) to determine in which PCI slot you should install the graphics adapter. Some systems are specific, especially when there are other PCI-based components installed. If still experiencing no connectivity and you also have an onboard graphics adapter (i.e. your PCI-based adapter is secondary), you may be able to switch the connection back to primary on the board. If the monitor functions while plugged into the primary adapter, you may either have a faulty PCI-based adapter, a faulty PCI slot or simply a setting in bios or within the operating system that's forcing the connection to work only with the integrated onboard graphics adapter.
How do you disable Onboard VGA Controller using Windows 7?
onboard video cards are enabled or disabled in the system bios, which is able to be entered on boot by pressing a key or key combination, your documentation should tell the key or keys to press. Also the onboard video card can be disabled in the system controle panel in windows, However doing so this way can cause system conflicts as it will still delegate recources and an interrupt to the disabled video. Perfered way is from the system bios
How do you get a hard drive recognized through a USB adapter?
If the system does not recognize and configure itself for the hardware it means the system can not identify the signature the USB device is presenting to the system. If you received a CD with the USB adapter, it should contain the driver and information needed to install it. Otherwise search the internet or the USB adapter vendor web site for drivers ad instructions for how to install it.
Onboard diagnostic system for 94 Chrysler lebaron?
The scanner plug in is under the dash on the drivers side and is the OBD1 system
What is primary key in information system?
A primary key is a unique identifier for each record in a database table. It ensures that each record can be uniquely identified and helps maintain data integrity by preventing duplicate records. The primary key is used to establish relationships between tables in a relational database.
What does the AC adapter do for n64?
The AC adapter for the N64 is the power source of the system. It is what plugs into the wall and runs the system. Without this key piece your N64 would not function. .j.
Can you take a PS3 game system on southwest airlines?
Yes, you can take it onboard, but you cannot switch it on.
What is the meaning of delight needs in?
the customer would like the dealer to include an onboard navigation system
How do you reset a vw golf 2004 onboard computer after servicing?
You can reset the VW Golf 200 onboard computer after servicing with ignition. This will take the system back to the default settings which you can configure to your preference.Ê
Do I need an adapter for electrical in Australia?
If your equipment is from North America then yes you will need an adapter as the Australians use a 230 volt system.
Does Arkansas have a primary or caucus system?
Arkansas has an Open primary system.
