0
onboard video cards are enabled or disabled in the system bios, which is able to be entered on boot by pressing a key or key combination, your documentation should tell the key or keys to press. Also the onboard video card can be disabled in the system controle panel in windows, However doing so this way can cause system conflicts as it will still delegate recources and an interrupt to the disabled video. Perfered way is from the system bios
What else can I help you with?
What tool in windows vista used to temporarily disable a startup program is not available in windows xp?
You can use Windows Defender to disable programs that run at startup, or using System Configuration.
How do you use a xbox 360 controller on windows?
If you are using a wireless controller you cannot use it with your computer. If it is a USB controller, simply plug in the USB head into a USB port on your PC and all drivers will be preinstalled on a Windows machine. Before you use it, please configure the keys that the controller will use.
Can you get dts and dolby 5.1 effect from a PC or laptop?
You need either a motherboard that has built-in 5.1 or better capability; if you don't have that, the only alternative is to add a soundcard that has the capability. If you're currently using the onboard sound, you'll have to disable the onboard sound in the BIOS before using the new soundcard.
Host computer has been compromised by out side attack on ports 1070 and 1071 what to do?
If you are using windows the go to ->control panel -> windows security -> disable your selected port. or your can disable this port by configure your modem contact your operator.
How do you disable a storage device by using BIOS and configure driver signing verification?
Disabling a storage device may be possible by entering the BIOS, finding the controller settings, and turning off the port you wish to disable. In some BIOSes, there is no option to disable controllers, unplugging the power from the device will work as well. Depending on the version of Windows you are running, configuring driver signing verification will differ. On Windows 7, one method of configuring it is to open a command prompt as an Admin and type bcdedit -set load options DISABLE_INTEGRITY_CHECKS followed by bcedit -set TESTSIGNING ON.
How do you disable a storage device using BIOS and configuring driver signing verification?
Disabling a storage device may be possible by entering the BIOS, finding the controller settings, and turning off the port you wish to disable. In some BIOSes, there is no option to disable controllers, unplugging the power from the device will work as well. Depending on the version of Windows you are running, configuring driver signing verification will differ. On Windows 7, one method of configuring it is to open a command prompt as an Admin and type bcdedit -set load options DISABLE_INTEGRITY_CHECKS followed by bcedit -set TESTSIGNING ON.
How do you disable the run command using windows xp registry editor?
To disable the Run command in Windows XP using the Registry Editor, first, open the Registry Editor by typing regedit in the Start menu's Run dialog. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer. If the Explorer key doesn’t exist, create it. Then, create a new DWORD value named NoRun and set its value to 1. This will disable the Run command from the Start menu. Restart your computer for the changes to take effect.
Can you disable balloon tips for all users using Group Policy?
Yes, for Windows XP and Windows 2003, but not for Windows 2000. The answer lies within Administrative Templates | Start Menu and Taskbar | Remove Balloon Tips on Start Menu items.
The unattend.txt file included as a sample on the windows xp professional CD can be used as is to perform an upgrade of windows NT workstation?
In Microsoft Windows NT, you can automate the installation of a domain controller using unattended Setup, or while performing a normal, attended installation.
What tool can you to check for hardware errors and disable recently installed devices?
You can use the Device Manager in Windows to check for hardware errors and disable recently installed devices. To access it, right-click on the Start menu and select "Device Manager." From there, you can look for devices with warning icons, indicating errors, and right-click to disable any recently added hardware. Additionally, using the Windows Troubleshooter can help identify and resolve hardware issues.
What is windows zero config mode?
Have a look at some advice about not needing WZC Mode if you are only using your single, home wireless network at http://paininthetech.com/2005/10/25/disable-wireless-zero-configuration-in-windows-xp
How do you get rid of a firewall?
depends on the software you are using for the firewall. if your using windows xp firewall just disable it. start-->control panel-->firewall then click the opt button to turn it off. This is not a detailed enough answer neither does it work.
