If they are bad, then yes. If not, then don't bother replacing them.
A piece of a cigarette box should do it .
No. It should be just past top.
that should be 6 horse it is 14 cid
Briggs and stratton engines use different oils depending on the temperature to which the engines will be used. Generally sae30 oil should be used for mower engines
There is no "gas oil ratio", the 3.5 hp Briggs and Stratton engine is a four-stroke design, oil should NOT be put into the fuel!!!
You should always have 20 fluid ounces of oil in a Briggs and Stratton 5.5 HP lawn mower. This equals out to roughly 1.6 quarts.
The spark plug gap for a Briggs and Stratton 13 horsepower engine should be .030 inches. A spark plug for this engine may be purchased at an auto parts store.
The spark plug gap for a Briggs and Stratton 13 horsepower engine should be .030 inches. A spark plug for this engine may be purchased at an auto parts store.
The spark plug should be gaped at .030"(76mm)
Should take a Champion: RC12YC
Unscrew radiator, should be two attachments connected to condenser. Unscrew them from the condenser and it should slide right out from in front of the radiator.
there should be a square headed plug at the base of the motor