0
Should you turn the screw up or down to make a pendulum go faster on a clock?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How Does the angle affect the simple pendulum?
By dampening. This can be done by changing the length of the pendulum The period is 2*pi*square root of (L/g), where L is the length of the pendulum and g the acceleration due to gravity. A pendulum clock can be made faster by turning the adjustment screw on the bottom of the bob inward, making the pendulum slightly shorter.
What are five uses of force?
When we use the screw and put it into a wall we rotate it to the clock wise
Why edge dislocation moves faster than screw dislocations?
Because the jog can not impede the slip behaviors of edge dislocation.
What is the diff between clock wise and counter clock wise?
Clockwise is the direction the hour, minute, and seconds hands go on a clock. Basically, clockwise is a circle that goes from right to left. Conversely, counterclockwise is a circle that goes from left to right.For example, most screws are inserted right to left. The common oldtime expression to remember this is "righty-tighty". That would be clockwise. To loosen the screw, the oldtime expression is "lefty loosey", meaning, turn the screw counterclockwise to loosen it.
How can you reduce friction on a screw?
There are several methods that you can use to reduce friction a screw. The guide collar of the screwdriver should be in an angular position in relation to the screw. This will ensure that the screw goes in a linear motion and reduces friction.
How can you accelerate a long clock pendulum?
You screw the adjuster up making the weight higher on the pendulum this will make your clock faster----but only a couple of turns at a time then if it goes to fast screw it down a little you will have to see if your clock gains time over a 24hr period and make adjustments as needed.
How Does the angle affect the simple pendulum?
By dampening. This can be done by changing the length of the pendulum The period is 2*pi*square root of (L/g), where L is the length of the pendulum and g the acceleration due to gravity. A pendulum clock can be made faster by turning the adjustment screw on the bottom of the bob inward, making the pendulum slightly shorter.
Should you use a screw anti clockwise or clockwise?
anti clock wise if you want to unscrew the moon
Which screw will rust faster an iron screw or a metal screw?
of course it is the iron screw because it is made up of minerals that rust faster then metal
What cleats are faster rubber cleats or screw on cleats?
As a DB and WR I can only say I'm faster with screw on cleats ;)
When was the Archimedes screw invented?
The Archimedes screw was invented in 250 B.C.
How high do you hang a clock on the wall?
Unless it's a cuckoo clock, eye level. If it is a small clock as part of a vignette, wherever it "fits". If it's a cuckoo clock, as high as is needed to allow the weights to reach the floor. Eye level to the top, middle or bottom? Don
How do you replace the battery in a miniature grandfather clock?
The grandfather clock should have a battery compartment located on the back of the clock or the bottom. It should look like square or rectangle. It may have a tiny screw in it. You need to open this compartment. The old batteries can be taken out and the new one put in their place. Be sure to align the positive and negative ends of the batteries according to the diagram.
What are five uses of force?
When we use the screw and put it into a wall we rotate it to the clock wise
2002 660 grizzly will not go over 51kmh in 2wd or 4wd how do you fix this?
check were your throtel is and there will be a screw it is probabley set for that speed to change bck the not off then undo the screw to go faster check were your throtel is and there will be a screw it is probabley set for that speed to change bck the not off then undo the screw to go faster
With what liquid makes a screw rust faster?
vinger makes it rust faster because it has acied in it and tap water does not
How do you replace a bulb in the clock of a Peugeot 406?
Been looking for info on this. Got bored waiting and got stuck in (1997 model). Get two screw drivers, stick one in between the clock and the dash at the top and another at the bottom. Lever the clock unit out gently. Unplug the clock unit connector at the back of the clock. On the side of the clock unit is a screw, which is the back of the bulb. Give it a quarter turn to release it (don't give it more than that, as the plastic will have become quite brittle over time and will crumble if you give it more). The bulb can then be pulled out (pliers or gentle screw driver work to lever it out). Insert new bulb and refit the clock. Hope that helps.
