0
Assuming that you have checked all your fuses and they are ok, then you may have a short. I found one at my front passenger side signal light, when i turned the bulb holder my bulbs would start working.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Why does your 1997 dodge grand caravan left signal always freeze?
Try replacing the bulb if not that check the flasher
Where do you need to look to change the turn signals on a 1997 Dodge Grand Caravan?
are you asking about the turn signal bulbs , the turn signal switch or turn signal flasher ?
Will axles from 1997 dodge caravan fit 2003 Dodge Grand Caravan?
No.
How do you change the alternator on a 1997 dodge caravan with a 3.3 engine?
How to replace or change the 1997 Dodge Caravan 3.3 liter engine
Does a 1997 dodge caravan transmission dipstick with tube fit in to a 1996 3.0 dodge caravan?
If the 1997 is also a 3.0L, then yes.
Dodge grand caravan 97 carburetor?
A 1997 Dodge Caravan is fuel injected, not carbureted.
What is the firing order of a 1997 Dodge Caravan?
The firing order of a 1997 Dodge Caravan is 1,3, 4, 2. Cylinder one is at the front of the engine.
Where is signal turn flasher in 1997 dodge grand caravan?
It is above your left leg under the fuse access. It is about 1 inch square by almost 2 inches tall. It is a combination unit for turn and emergency flashers It is the larger than the other little black boxes you find under there. It is not under the hood.
Where is the mass air flow sensor located on a 1997 Dodge Caravan?
A Dodge Caravan does not have a mass air flow sensor.
Tire size for a 1997 dodge caravan?
The recommended tire size for a 1997 Dodge Caravan is P205 75R 14. These tires have a speed rating of 112 mph.
How do you change signal light in a 1996 dodge grand caravan?
This is described here: How_do_you_change_the_front_signal_light_on_a_1997_Dodge_CaravanThe 1996 and 1997 models seem to be similar enough for this to cover both.
Where is the inertia switch on a 1997 Dodge Caravan?
The Dodge Caravan doesn't use an inertia switch. The fuel pump is controlled by a relay.
