There are different specifications. Is this new oil or used oil? What type of oil is it? There are at least 3 classes of insulating liquids. I will assume that this is for new Mineral Oil such as Diala-A. Here are the minimum requirements from NETA ATS 2007: Dielectric Breakdown (ASTM D877) = 30 kv Interfacial Tension (ASTM D971) = 38 minimum Neutralization Number (ASTM D974) = 0.015 maximum Water Content (ASTM D1533) = 20 ppm maximum Power Factor @ 25C (ASTM D924) = 0.05% maximum Power Factor @ 100C (ASTM D924) = 0.40% maximum Color (ASTM D1500) = 1.0 Again if it is a different class of insulating fluid there will be additional and/or different limits.
to cool a winding of transformer and it is a insulating material and transformer oil is a purifing oil
Nytro libra is an uninhibited transformer oil
transformer consists of polychlorinated biphenyls,...etc
The oil level indicator in a transformer is used to show the oil level.
Blowdown Valves In case of Transformer oil the meaning of BDV is break down voltage. It refers to the one of the tests of the oil.
Oil is used to cool the transformer. There is no telling what the transformer in question uses without knowing the specific part number and looking up the specification.
Transformer oil is pure insulating oil.
to cool a winding of transformer and it is a insulating material and transformer oil is a purifing oil
Nytro libra is an uninhibited transformer oil
An oil transformer is filled with PCB oil to better transfer heat from the windings to the outside case (and into the air).
transformer consists of polychlorinated biphenyls,...etc
As well as providing a cooling medium, transformer oil is also used to insulate a transformer. As its dielectric strength (how well it insulates) is much higher than air, it means that components within a transformer that are at different potentials can be placed much closer together if they are immersed in oil. So, operating an oil-filled transformer without oil will likely cause insulation breakdown within the transformer.
convection currents
it is a pit which is used to drain leakage oil of transformers .AnswerIt's a walled area, surrounding a transformer, intended to contain any oil leakage from a transformer.
minarel or power oil
Its "Mineral Oil".
The function of the radiator ban in a transformer is to cool the transformer oil.