The steering and ignition will become locked on a 97 Chevy Cavalier if the key is not inserted into the ignition and turned. This helps to prevent theft.
I have a 97 Cavalier,,,and one key does the door , ignition and trunk.
The steering wheel on a 1997 Buick Skylark may be locked due to the ignition system's anti-theft feature, which engages when the key is removed or if the steering wheel is turned without the key in the ignition. This locking mechanism is designed to prevent theft and ensure that the vehicle cannot be steered without the proper key. To unlock it, gently turn the steering wheel left or right while inserting and turning the ignition key. If the issue persists, there may be other underlying mechanical problems that need to be addressed.
Your power steering units pulley has worn or broken bearings. This can harm your vehicle, suggest you have it replaced.
Pull your steering colum apart along with steering wheel and dash plastic, ignition swith is next to the key tumbler. Swap the parts.
around $40. check www.autozone.com and www.oreilyautoparts.com to check for prices around your area
you have a bad cv drive shaft
Where is the ignition module 97 explorer
Between the power steering pump and the water pump. The only one of two pulleys that is smooth versus grooved.
how do you remove and replace the distributor cap on a 97 chevy cavalier?. I can not get to it.
Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder
Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder
how do i remove the upper intake manifold on a 97 chevy cavalier 2.2l v4