put the car on ramps put something to catch the oil under the oil pan open the hood remove the oil cap on the top of the engine unscrew the oil pan boly let it drain then remove the oil filter then once the engine has no oil put the oil pan bolt back in lube the oil filter seal put the new oil filter on and pour the oil in then turn the car on for a second to let the oil run through turn it off then check your oil level and your good to go.
5 quarts
If you are changing the oil and the filter then you will need 5 quarts.
5 quarts with the filter change.
i suggest you use 10w-30 valvoline
Depending on the engine capacity the oil must be changed in regular service period. The Camaro will require 4.5 L for regular oil change. It can hold 5.5 also.
The basic steps to changing the oil in a van are; step one, drain oil from the van; step two, add new oil into the van. Also you must find a place to dispose of the oil. You cannot put it into the sewer.
Check coil! Check coil!
GM 90 weight gear oil
The oil pump is bolted to the bottom of the engine block inside the oil pan. A lot of work is involved in changing this part. I suggest you see a mechanic.
It will take Dextron II or Dextron III. If your changing the trans filter, it will take about five quarts.
With oil and filter change it takes 5 qts. with just oil change and not filter 4 qts.
10w30 in hot climate 5w30 in cold climate same with all Chevy small blocks.