There are three ways to find a gear ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
There are three ways to find a gear ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
the stock Toyota gear ratio is 4.11
The gear ratio of a 2001 Toyota Tacoma 4x4 ranges from 3.15 to 4.56 depending on the configuration. This ratio determines the number of times the wheels turn in relation to the engine and transmission.
The stock rear-end gear ratio for all US 240sx is 4.083
3.23 would be stock.
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
3.73
More than likely a 3.08 gear ratio. which is a highway gear and a little strip very little unless not stock clutch/torque conveter
The stock gear ratio for a 1995 Chevy Blazer is 3.73. This provides a good balance of fuel economy and power to the rear wheels.
3.91:1
Most any stock carrier without a posi with have a 2:73 ratio
3.55