To provide automatic circuit protection.
The place where the power drop from the electric company enters your house. The service panel is where the fuses or breaker switches are.
The meter is typically installed in the main circuit panel of the house. If you want to move it, you can do it as part of a service / panel upgrade. We did this when we moved into our new house - we replaced the 1950s vintage main circuit panel and 100A service with a newer 200A panel and service. It was about a grand, but we didn't actually move the panel from where it was, so it may cost more for what you want.
Either 110 v or 220 and 110, depending on how your house is wired.
It was probably a 150 amp service back in 1995. Todays services are usually 200 amps.
No, you cannot put but one set of wires in a meter base. The way to go about this, is to mount an outside panel beside your meter base. Panel sized to existing house service, equipped with two main breakers. One to re-feed the house panel the other to feed your shop.
Depends on the size of the sub-panel in that garage. If you are installing a 60 amp sub-panel 400 feet away from the main service panel then use AWG # 4.
A panel thief is a thief who operates in a panel house.
You can but you may need new Service wires ran to your house to support the larger load. You will probably be looking at paying a couple thousand dollars for it.
Yes, the panel house is better than the brick house. This is because the panel house is greener, cleaner, more energy efficient and environment friendly as compared to the brick house.
See discuss question button below.
A temporary ad hoc panel composed of House and Senate conferees which is formed for the purpose of reconciling differences in legislation that has passed both chambers.
A temporary ad hoc panel composed of House and Senate conferees which is formed for the purpose of reconciling differences in legislation that has passed both chambers.