The magnification of a telescope is the ratio of the effective focal length of the objective to the focal length of the eyepiece. For example, a small telescope's objective may have a focal length of 800mm. When an eyepiece with a focal length of 25mm is used, the magnification is 800/25 = 32.
The term "effective focal length" refers to the focal length of the objective as affected by any "focal extender". Many telescopes are designed to have a short total size, but high power, by "folding" the optical path. A mirror-type objective with a focal length of perhaps 800mm is coupled with a smaller curved mirror that intercepts the last 200mm and extends it to 800mm, a 4x extension, so that the effective focal length of that objective is 3200mm. Use that with a 25mm eyepiece and the magnification is 3200/25 = 128.
By the way, if a telescope is smaller than you are, it is seldom much use to view using a magnification greater than 50 to 100. Most objects are best viewed at relatively low powers such as 30 or so.
No, you can change the magnification of the telescope by simply changing the eyepiece. The two most important powers of the telescope, light-gathering power and resolving power, depend on the diameter of the telescope, but it does not control the magnification.
A refracting telescope can show different views of planets by adjusting the eyepiece magnification. By changing the eyepiece, you can increase or decrease the magnification to see different details and perspectives of the planet. This allows for different views of the planetary surface, rings, or moons.
The magnification of a telescope is the ratio of the effective focal length of the objective to the focal length of the eyepiece. For example, a small telescope's objective may have a focal length of 800mm. When an eyepiece with a focal length of 25mm is used, the magnification is 800/25 = 32. The term "effective focal length" refers to the focal length of the objective as affected by any "focal extender". Many telescopes are designed to have a short total size, but high power, by "folding" the optical path. A mirror-type objective with a focal length of perhaps 800mm is coupled with a smaller curved mirror that intercepts the last 200mm and extends it to 800mm, a 4x extension, so that the effective focal length of that objective is 3200mm. Use that with a 25mm eyepiece and the magnification is 3200/25 = 128. By the way, if a telescope is smaller than you are, it is seldom much use to view using a magnification greater than 50 to 100. Most objects are best viewed at relatively low powers such as 30 or so.
The formula for calculating the angular magnification of a telescope is: Magnification focal length of the objective lens / focal length of the eyepiece.
a telescope's magnification is calculated as the ratio of the focal length of the primary objective to the focal length of the eyepiece. Since a telescope is defined by the primary objective, this part of it is essentially unchangeable. Therefore, the way to increase magnification is to decrease the focal length of the eyepiece. For example, a 1000mm objective and a 25mm eyepiece yields a magnification of (1000/25) 40x. Changing the eyepiece to a 10mm eyepiece increases magnification to (1000/10) 100x.
The focal length of a telescope is directly related to the magnification in that the longer the focal length, the more magnification you get from the telsceope. How the focal length of a telescope relates to the length of the telescope itself depends on the design of the telescope. In a refracting telescope, the focal length is approximately the length of the telescope. In a reflecting telescope, the focal length is roughly two time the length of the telescope.
The magnification of a telescope is calculated by dividing the focal length of the telescope by the focal length of the eyepiece. In this case, the magnification would be 3000 mm (telescope focal length) divided by 15 mm (eyepiece focal length), which equals a magnification of 200x.
285 X maximum "usable" magnification
Magnification refers to a telescope's ability to make an object appear larger when viewed through the telescope. It is the degree to which the image of the object is enlarged compared to what is seen with the naked eye.
no lens is changed!
Galileo did not invent the microscope; he is credited with improving the design of the telescope. Galileo's telescope had a magnification of around 30x, which allowed him to make groundbreaking astronomical observations, such as the moons of Jupiter.
It does not have a magnification properly speaking since it works as a camera, not a visual telescope. The aperture of the Cassegrain-Schmidt mirror is 2.4 m. The main camera has 16 MB.