R1 will forward the route information for subnet 192.168.100.0/30.
R1 will not forward route information for subnet 192.168.100.4/30.
The routers are configured with different versions of RIP. R2 is not forwarding the routing updates.
IP addresses are assigned by the network administrator, or ISP. The computer does have to be configured manually to respond to that specific address.
Enter CTRL-Z at the privileged mode prompt.
Network Administrator.
I assume your server is a gateway... One of the reasons is that it is not configured properly or one or more services have failed require attention of network administrator.
Network administrator security+ administrator computer technical support support technician information technology specialist Help desk technician
A network that has ten or more nodes is usually configured as a client/server network.
ifconfig
The administrator can set up a Local Area Network (LAN) behind a firewall in which he can assign whatever IP address block he wishes. The firewall and router will then need to be configured to Network Address Translate (NAT) the 'hidden' internal IP addresses used on the LAN to the one assigned by the ISP when network traffic needs to leave the LAN.
This device is called a ROUTER. Routers are by default configured to not pass the broadcast traffic to another networks to which it connects. But by some means it could be also a SWITCH - sometimes it can be configured to filter different type of network traffic.
You can become a network administrator by creating your account and ticking that you will be the network administrator and that you are allowed access to everything.
Each computer requests configuration information from a server.