0
The next generation of smaller faster computers that will fit into a single human cell are known as?
Wiki User
∙ 14y ago
nanocomputers
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the example of 5th generation of computers?
First Generation (1940-1956) Vacuum TubesThe first computers used vacuum tubes for circuitry and magnetic drums for memory, and were often enormous, taking up entire rooms. They were very expensive to operate and in addition to using a great deal of electricity, generated a lot of heat, which was often the cause of malfunctions.Second Generation (1956-1963) TransistorsTransistorsreplaced vacuum tubes and ushered in the second generation of computers. The transistor was invented in 1947 but did not see widespread use in computers until the late 1950s. The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper, more energy-efficient and more reliable than their first-generation predecessors. Though the transistor still generated a great deal of heat that subjected the computer to damage, it was a vast improvement over the vacuum tube. Second-generation computers still relied on punched cards for input and printouts for output.Third Generation (1964-1971) Integrated CircuitsThe development of the integrated circuit was the hallmark of the third generation of computers. Transistors were miniaturized and placed on siliconchips, called semiconductors, which drastically increased the speed and efficiency of computers.Fourth Generation (1971-Present) MicroprocessorsThe microprocessorbrought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.Fifth Generation (Present and Beyond) Artificial IntelligenceFifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular andnanotechnologywill radically change the face of computers in years to come. The goal of fifth-generation computing is to develop devices that respond to natural language input and are capable of learning and self-organization.
Who invented the fifth generation of computer?
The fifth generation of computers was not created by a single individual, but instead was a collaborative effort among multiple researchers and organizations. It was developed in the 1980s and onwards with contributions from Japan, the United States, and other countries. These computers were characterized by advancements in areas such as artificial intelligence, parallel processing, and supercomputers.
Five generation of the operating system?
First Generation (1940-1956) Vacuum Tubes SponsoredUse the IBM SmartCloud Simulator:: Get an interactive tour that shows you several ways you can use and manage IBM SmartCloud to provide your business the IT resources it needs.The first computers used vacuum tubes for circuitry and magnetic drums formemory, and were often enormous, taking up entire rooms. They were very expensive to operate and in addition to using a great deal of electricity, generated a lot of heat, which was often the cause of malfunctions.First generation computers relied on machine language, the lowest-level programming language understood by computers, to perform operations, and they could only solve one problem at a time. Input was based on punched cards and paper tape, and output was displayed on printouts.The UNIVAC and ENIAC computers are examples of first-generation computing devices. The UNIVAC was the first commercial computer delivered to a business client, the U.S. Census Bureau in 1951. Second Generation (1956-1963) Transistors Transistors replaced vacuum tubes and ushered in the second generation of computers. The transistor was invented in 1947 but did not see widespread use in computers until the late 1950s. The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper, more energy-efficient and more reliable than their first-generation predecessors. Though the transistor still generated a great deal of heat that subjected the computer to damage, it was a vast improvement over the vacuum tube. Second-generation computers still relied on punched cards for input and printouts for output.Second-generation computers moved from cryptic binary machine language to symbolic, or assembly, languages, which allowed programmers to specify instructions in words. High-level programming languages were also being developed at this time, such as early versions of COBOL and FORTRAN. These were also the first computers that stored their instructions in their memory, which moved from a magnetic drum to magnetic core technology.The first computers of this generation were developed for the atomic energy industry. Third Generation (1964-1971) Integrated Circuits The development of the integrated circuit was the hallmark of the third generation of computers. Transistors were miniaturized and placed on silicon chips, called semiconductors, which drastically increased the speed and efficiency of computers.Instead of punched cards and printouts, users interacted with third generation computers through keyboards and monitorsand interfaced with an operating system, which allowed the device to run many different applications at one time with a central program that monitored the memory. Computers for the first time became accessible to a mass audience because they were smaller and cheaper than their predecessors. Fourth Generation (1971-Present) Microprocessors The microprocessor brought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.In 1981 IBM introduced its first computer for the home user, and in 1984 Apple introduced the Macintosh. Microprocessors also moved out of the realm of desktop computers and into many areas of life as more and more everyday products began to use microprocessors.As these small computers became more powerful, they could be linked together to form networks, which eventually led to the development of the Internet. Fourth generation computers also saw the development of GUIs, the mouse and handhelddevices. Fifth Generation (Present and Beyond) Artificial Intelligence Fifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular and nanotechnology will radically change the face of computers in years to come. The goal of fifth-generation computing is to develop devices that respond to natural language input and are capable of learning and self-organization.Read more: What_are_the_five_generations_of_operating_systems_in_history
What is the difference between 1st and 2nd generation of computer?
First Generation Computers refer to ones with vacuum tubes and were really huge and required vast amounts of electricity. The programming was very limited and very complex USN machine language. Usually they were hardwired and the applications very limited. Second Generation Computer were built using transistors that were much smaller and required less power and space. General Purpose program languages were developed that could be moved from 1 computer to the next.
What are the characteristic of computer generations?
First Generation (1940-1956) Vacuum Tubes SponsoredProvide your business with the IT resources it needs::The IBM SmartCloud Simulator is an interactive tour that will show you several ways that you can use and manage this exciting product.The first computers used vacuum tubes for circuitry and magnetic drums for memory, and were often enormous, taking up entire rooms. They were very expensive to operate and in addition to using a great deal of electricity, generated a lot of heat, which was often the cause of malfunctions.First generation computers relied on machine language, the lowest-level programming language understood by computers, to perform operations, and they could only solve one problem at a time. Input was based on punched cards and paper tape, and output was displayed on printouts.The UNIVAC and ENIAC computers are examples of first-generation computing devices. The UNIVAC was the first commercial computer delivered to a business client, the U.S. Census Bureau in 1951. Second Generation (1956-1963) TransistorsTransistors replaced vacuum tubes and ushered in the second generation of computers. The transistor was invented in 1947 but did not see widespread use in computers until the late 1950s. The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper, more energy-efficient and more reliable than their first-generation predecessors. Though the transistor still generated a great deal of heat that subjected the computer to damage, it was a vast improvement over the vacuum tube. Second-generation computers still relied on punched cards for input and printouts for output.Second-generation computers moved from cryptic binary machine language to symbolic, or assembly, languages, which allowed programmers to specify instructions in words. High-level programming languages were also being developed at this time, such as early versions of COBOL and FORTRAN. These were also the first computers that stored their instructions in their memory, which moved from a magnetic drum to magnetic core technology.The first computers of this generation were developed for the atomic energy industry. Third Generation (1964-1971) Integrated CircuitsThe development of the integrated circuit was the hallmark of the third generation of computers. Transistors were miniaturized and placed on silicon chips, called semiconductors, which drastically increased the speed and efficiency of computers.Instead of punched cards and printouts, users interacted with third generation computers through keyboards and monitors and interfaced with an operating system, which allowed the device to run many different applications at one time with a central program that monitored the memory. Computers for the first time became accessible to a mass audience because they were smaller and cheaper than their predecessors. Fourth Generation (1971-Present) MicroprocessorsThe microprocessor brought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.In 1981 IBM introduced its first computer for the home user, and in 1984 Apple introduced the Macintosh. Microprocessors also moved out of the realm of desktop computers and into many areas of life as more and more everyday products began to use microprocessors.As these small computers became more powerful, they could be linked together to form networks, which eventually led to the development of the Internet. Fourth generation computers also saw the development of GUIs, the mouse and handheld devices. Fifth Generation (Present and Beyond) Artificial IntelligenceFifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular and nanotechnology will radically change the face of computers in years to come. The goal of fifth-generation computing is to develop devices that respond to natural language input and are capable of learning and self-organization.
First generation computers are called ICL2900HP9845 A VAX11780.What are second generation computers called?
Second Generation computers. The VAX mentioned above is just a single model of first generation electronic computers.
How do microprocessors change computers?
Microprocessors mainly changed computers by making them faster and smaller. In the past, the central processing unit was a cabinet full of circuit boards. Today, multiple central processing units are contained in one single chip and fit onto a single circuit board. This also makes computers smaller since millions of transistors and other components are all on a single die with all the components near each other.
What are the characteristics of fourth generation computers?
microprocessors, either single or multi chip.
Why have computers got smaller?
Newer electronics devices introduced in each computer generation (and thereby defining the generation) are more compact and consume less power than the older electronic devices, enabling the size of both the computer's electronic hardware and cooling system to be reduced significantly.
What are the advantages of third generation computers?
the computer of this generation could be developed after the development of integrated Circuits. integrated circuits were made of cilicon.A single IC could hold a no.of transistors and resistors.this was also called chip. the computer of this generation were 1000 times fast as compared to first generation computers and their cost was comparatively low.The memory of these computers was much more and data processing became very fast.
What is the example of 5th generation of computers?
First Generation (1940-1956) Vacuum TubesThe first computers used vacuum tubes for circuitry and magnetic drums for memory, and were often enormous, taking up entire rooms. They were very expensive to operate and in addition to using a great deal of electricity, generated a lot of heat, which was often the cause of malfunctions.Second Generation (1956-1963) TransistorsTransistorsreplaced vacuum tubes and ushered in the second generation of computers. The transistor was invented in 1947 but did not see widespread use in computers until the late 1950s. The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper, more energy-efficient and more reliable than their first-generation predecessors. Though the transistor still generated a great deal of heat that subjected the computer to damage, it was a vast improvement over the vacuum tube. Second-generation computers still relied on punched cards for input and printouts for output.Third Generation (1964-1971) Integrated CircuitsThe development of the integrated circuit was the hallmark of the third generation of computers. Transistors were miniaturized and placed on siliconchips, called semiconductors, which drastically increased the speed and efficiency of computers.Fourth Generation (1971-Present) MicroprocessorsThe microprocessorbrought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.Fifth Generation (Present and Beyond) Artificial IntelligenceFifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular andnanotechnologywill radically change the face of computers in years to come. The goal of fifth-generation computing is to develop devices that respond to natural language input and are capable of learning and self-organization.
Who invented the fifth generation of computer?
The fifth generation of computers was not created by a single individual, but instead was a collaborative effort among multiple researchers and organizations. It was developed in the 1980s and onwards with contributions from Japan, the United States, and other countries. These computers were characterized by advancements in areas such as artificial intelligence, parallel processing, and supercomputers.
Classification of computer according to generation?
First Generation (1940-1956) Vacuum Tubes SponsoredIs your network ready for the cloud? Find out : read "Five Reasons Classic Ethernet Switches Won't Support the Cloud" and learn how to examine your network's strength and eliminate any weak points.The first computers used vacuum tubes for circuitry and magnetic drums formemory, and were often enormous, taking up entire rooms. They were very expensive to operate and in addition to using a great deal of electricity, generated a lot of heat, which was often the cause of malfunctions.First generation computers relied on machine language, the lowest-level programming language understood by computers, to perform operations, and they could only solve one problem at a time. Input was based on punched cards and paper tape, and output was displayed on printouts.The UNIVAC and ENIAC computers are examples of first-generation computing devices. The UNIVAC was the first commercial computer delivered to a business client, the U.S. Census Bureau in 1951. Second Generation (1956-1963) TransistorsTransistors replaced vacuum tubes and ushered in the second generation of computers. The transistor was invented in 1947 but did not see widespread use in computers until the late 1950s. The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper, more energy-efficient and more reliable than their first-generation predecessors. Though the transistor still generated a great deal of heat that subjected the computer to damage, it was a vast improvement over the vacuum tube. Second-generation computers still relied on punched cards for input and printouts for output.Second-generation computers moved from cryptic binary machine language to symbolic, or assembly, languages, which allowed programmers to specify instructions in words. High-level programming languages were also being developed at this time, such as early versions of COBOL and FORTRAN. These were also the first computers that stored their instructions in their memory, which moved from a magnetic drum to magnetic core technology.The first computers of this generation were developed for the atomic energy industry. Third Generation (1964-1971) Integrated CircuitsThe development of the integrated circuit was the hallmark of the third generation of computers. Transistors were miniaturized and placed on silicon chips, called semiconductors, which drastically increased the speed and efficiency of computers.Instead of punched cards and printouts, users interacted with third generation computers through keyboards and monitorsand interfaced with an operating system, which allowed the device to run many different applications at one time with a central program that monitored the memory. Computers for the first time became accessible to a mass audience because they were smaller and cheaper than their predecessors. Fourth Generation (1971-Present) MicroprocessorsThe microprocessor brought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.In 1981 IBM introduced its first computer for the home user, and in 1984 Apple introduced the Macintosh. Microprocessors also moved out of the realm of desktop computers and into many areas of life as more and more everyday products began to use microprocessors.As these small computers became more powerful, they could be linked together to form networks, which eventually led to the development of the Internet. Fourth generation computers also saw the development of GUIs, the mouse and handhelddevices. Fifth Generation (Present and Beyond) Artificial IntelligenceFifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular and nanotechnology will radically change the face of computers in years to come. The goal of fifth-generation computing is to develop devices that respond to natural language input and are capable of learning and self-organization.
Explain the differences between the computers of today and the computers 10 years ago?
Computers in the form of personal desktop computers, laptops and tablets have become such an important part of everyday living that it can be difficult to remember a time when they did not exist. In reality, computers as they are known and used today are still relatively new. Although computers have technically been in use since the abacus approximately 5000 years ago, it is modern computers that have had the greatest and most profound effect on society. The first full-sized digital computer in history was developed in 1944. Called the Mark I, this computer was used only for calculations and weighed five tons. Despite its size and limited ability it was the first of many that would start off generations of computer development and growth. First Generation Computers First generation computers bore little resemblance to computers of today, either in appearance or performance. The first generation of computers took place from 1940 to 1956 and was extremely large in size. The inner workings of the computers at that time were unsophisticated. These early machines required magnetic drums for memory and vacuum tubes that worked as switches and amplifiers. It was the vacuum tubes that were mainly responsible for the large size of the machines and the massive amounts of heat that they released. These computers produced so much heat that they regularly overheated despite large cooling units. First generation computers also used a very basic programming language that is referred to as machine language. Second Generation Computers The second generation (from 1956 to 1963) of computers managed to do away with vacuum tubes in lieu of transistors. This allowed them to use less electricity and generate less heat. Second generation computers were also significantly faster than their predecessors. Another significant change was in the size of the computers, which were smaller. Transistor computers also developed core memory which they used alongside magnetic storage. Third Generation Computers From 1964 to 1971 computers went through a significant change in terms of speed, courtesy of integrated circuits. Integrated circuits, or semiconductor chips, were large numbers of miniature transistors packed on silicon chips. This not only increased the speed of computers but also made them smaller, more powerful, and less expensive. In addition, instead of the punch cards and the printouts of previous systems, keyboards and monitors were now allowing people to interact with computing machines. Fourth Generation Computers The changes with the greatest impact occurred in the years from 1971 to 2010. During this time technology developed to a point where manufacturers could place millions of transistors on a single circuit chip. This was called monolithic integrated circuit technology. It also heralded the invention of the Intel 4004 chip which was the first microprocessor to become commercially available in 1971. This invention led to the dawn of the personal computer industry. By the mid-70s, personal computers such as the Altair 8800 became available to the public in the form of kits and required assembly. By the late 70s and early 80s assembled personal computers for home use, such as the Commodore Pet, Apple II and the first IBM computer, were making their way onto the market. Personal computers and their ability to create networks eventually would lead to the Internet in the early 1990s. The fourth generation of computers also saw the creation of even smaller computers including laptops and hand-held devices. Graphical user interface, or GUI, was also invented during this time. Computer memory and storage also went through major improvements, with an increase in storage capacity and speed. The Fifth Generation of Computers In the future, computer users can expect even faster and more advanced computer technology. Computers continue to develop into advanced forms of technology. Fifth generation computing has yet to be truly defined, as there are numerous paths that technology is taking toward the future of computer development. For instance, research is ongoing in the fields of nanotechnology, artificial intelligence, as well as quantum computation.
What is the definition of the word generations?
* generations - coevals: all the people living at the same time or of approximately the same age * generation - group of genetically related organisms constituting a single step in the line of descent * generation - the normal time between successive generations; "they had to wait a generation for that prejudice to fade" * generation - a stage of technological development or innovation; "the third generation of computers" * generation - Generates -genesis: a coming into being
Five generation of the operating system?
First Generation (1940-1956) Vacuum Tubes SponsoredUse the IBM SmartCloud Simulator:: Get an interactive tour that shows you several ways you can use and manage IBM SmartCloud to provide your business the IT resources it needs.The first computers used vacuum tubes for circuitry and magnetic drums formemory, and were often enormous, taking up entire rooms. They were very expensive to operate and in addition to using a great deal of electricity, generated a lot of heat, which was often the cause of malfunctions.First generation computers relied on machine language, the lowest-level programming language understood by computers, to perform operations, and they could only solve one problem at a time. Input was based on punched cards and paper tape, and output was displayed on printouts.The UNIVAC and ENIAC computers are examples of first-generation computing devices. The UNIVAC was the first commercial computer delivered to a business client, the U.S. Census Bureau in 1951. Second Generation (1956-1963) Transistors Transistors replaced vacuum tubes and ushered in the second generation of computers. The transistor was invented in 1947 but did not see widespread use in computers until the late 1950s. The transistor was far superior to the vacuum tube, allowing computers to become smaller, faster, cheaper, more energy-efficient and more reliable than their first-generation predecessors. Though the transistor still generated a great deal of heat that subjected the computer to damage, it was a vast improvement over the vacuum tube. Second-generation computers still relied on punched cards for input and printouts for output.Second-generation computers moved from cryptic binary machine language to symbolic, or assembly, languages, which allowed programmers to specify instructions in words. High-level programming languages were also being developed at this time, such as early versions of COBOL and FORTRAN. These were also the first computers that stored their instructions in their memory, which moved from a magnetic drum to magnetic core technology.The first computers of this generation were developed for the atomic energy industry. Third Generation (1964-1971) Integrated Circuits The development of the integrated circuit was the hallmark of the third generation of computers. Transistors were miniaturized and placed on silicon chips, called semiconductors, which drastically increased the speed and efficiency of computers.Instead of punched cards and printouts, users interacted with third generation computers through keyboards and monitorsand interfaced with an operating system, which allowed the device to run many different applications at one time with a central program that monitored the memory. Computers for the first time became accessible to a mass audience because they were smaller and cheaper than their predecessors. Fourth Generation (1971-Present) Microprocessors The microprocessor brought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.In 1981 IBM introduced its first computer for the home user, and in 1984 Apple introduced the Macintosh. Microprocessors also moved out of the realm of desktop computers and into many areas of life as more and more everyday products began to use microprocessors.As these small computers became more powerful, they could be linked together to form networks, which eventually led to the development of the Internet. Fourth generation computers also saw the development of GUIs, the mouse and handhelddevices. Fifth Generation (Present and Beyond) Artificial Intelligence Fifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular and nanotechnology will radically change the face of computers in years to come. The goal of fifth-generation computing is to develop devices that respond to natural language input and are capable of learning and self-organization.Read more: What_are_the_five_generations_of_operating_systems_in_history
What is fourth generation computer?
Fourth Generation (1971-Present) MicroprocessorsThe microprocessor brought the fourth generation of computers, as thousands of integrated circuits were built onto a single silicon chip. What in the first generation filled an entire room could now fit in the palm of the hand. The Intel 4004 chip, developed in 1971, located all the components of the computer-from the central processing unit and memory to input/output controls-on a single chip.In 1981 IBM introduced its first computer for the home user, and in 1984 Apple introduced the Macintosh. Microprocessors also moved out of the realm of desktop computers and into many areas of life as more and more everyday products began to use microprocessors.As these small computers became more powerful, they could be linked together to form networks, which eventually led to the development of the Internet. Fourth generation computers also saw the development of GUIs, the mouse and handhelddevices.
