0
The receiver will be able to decode the message if the transmitter and receiver share the same?
Wiki User
∙ 12y ago
traffic encryption key
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is a device comprising both a transmitter and a receiver which are combined and share common circuitry or a single housing?
radio
What is a studio-transmitter link?
A studio-transmitter link (STL) is just that. It is the link between the studio and the transmitter. Let's look at one in action. KWIZ radio is a hip FM station with studios on the top floor of the insurance building downtown. They got a good deal on the space, and they like being downtown 'cause it makes them (and their listeners) feel more connected. Their transmitter is located on top of Mount Fritz, some 20 miles away. The transmitter is up there because real estate is a bit cheaper there, and from that spot it can hit (reach) a lot of territory. And the tower doesn't have to be super tall, either. Besides, there isn't any place downtown to put up an FM broadcast antenna. If the antenna was downtown, it would have to be super tall. And it couldn't get the kind of coverage KWIZ can get with a transmitter located up on a big hill. They want lots of area where their signal can reach out to and arrive at receivers. That translates into lots of listeners and lots of opportunities to sell radio ads and get lots of money for them because the station has lots of coverage/listeners. Dusty Rhodes and Sandy Beach share the mic on the morning show. They draw music from the tracks stored in the memory of the station's music computer. (Who still uses CD's?) When they play a tune, the signal is routed to the input of a microwave transmitter on the roof of the insurance building. The microwave transmitter takes that signal and uses it to modulate the microwave carrier, and then the modulated carrier is sent through amplifiers and finally to a microwave power amplifier. From there, it is sent into a waveguide (or, more probably, a length of heliax cable) and routed to the little microwave dish on that short mast on the roof. The dish is a parabolic reflector, and it may be anything from a foot or two across to half a dozen feet across, depending on the system used and the distance it needs to cover. (A meter in diameter would not be uncommon for something like this.) The microwave signal is then radiated from the feedhorn into the dish. From there it is reflected off the dish and goes where the dish is pointed. The transmitter's dish is pointed at a similar receiver dish up on Mount Fritz. That receiver dish (which is pointed at the transmitter dish) is often mounted on the tower that the FM broadcast antenna sits on. The microwave signal is collected on that second dish and reflected to the focal point to be gathered up by a horn positioned appropriately. There may be a low noise amplifier built right into the horn at the focal point of the receiver's dish. The microwave signal is then demodulated and music track recovered. Then that signal can then be used to modulate the FM transmitter, which is right there. The amplified signal goes out of the FM transmitter and into the transmission line which connects the transmitter to the antenna. The signal is being routed point to point from the studio to the transmitter. And that's the studio-transmitter link (STL) that is common today. AM and FM radio stations and also the TV stations use the links commonly.
How do you make adjustments to circuit components?
Joey doesnt share food
What does ipc mean?
AnswerIPC means Inter Process Communication. Two processes can communicate with each other using these Mechanism. They can use shared memory ,Pipes FIFO's Semaphore,Signals.They can send signals and they can kill each other.They can stop the process by sending the signal.They can share data using Shared memory.They can send messegs using Message Queue.Money advantages of IPC's are there.IPC also means Indian Penal Code. It is a document that covers almost all the crime happening in the society. It is a piece of British colonial legislation dating from 1860.
What is the uses of LAN?
Local area networks allow computers to be connected together to share services, peripherals and to allow control of groups of machines.
What is a device comprising both a transmitter and a receiver which are combined and share common circuitry or a single housing?
radio
What is a duplexer?
A duplexer is a device that allows bi-directional (duplex) communication over a single channel. In radar systems, a device that isolates the receiver from the transmitter while permitting them to share a common antenna. Note 1: A duplexer must be designed for operation in the frequency band used by the receiver and transmitter, and must be capable of handling the output power of the transmitter. Note 2: A duplexer must provide adequate rejection of transmitter noise occurring at the receive frequency, and must be designed to operate at, or less than, the frequency separation between the transmitter and receiver. Note 3: A duplexer must provide sufficient isolation to prevent receiver desensitization.Braimah prosper
How are the six phases of the communication process described?
1st the sender has the idea in the mind (conceives a thought and how he/she wants to share it) 2nd ,the sender encodes the idea (put it into the message form) 3rd, the sender transmits the message (sends the message using a specific channel and medium) 4th, the receiver gets the message (receives the message by hearing or reading it) 5th, the receiver decodes the message (absorbs and understands the meaning 6th, the receiver sends feedback to your message.
What is a transceiver comprised of?
A transceiver has both a transmitter and a receiver. These are combined to share common circuitry or a single housing. This allows a person to buy just one device rather than having to purchase each of them separately.
How do wireless antennas share information?
they dont. An antenna is simply a piece of metal hooked to a device (normally a radio or a walkie-talkie). A receiver (for example, a radio) pick up electrical signals from the antenna, and a transmitter sends them to the antenna. They can be combined to form a transceiver which then sends and receives signals from the antenna.
Is it legal to share Facebook message content with others on Facebook?
There is a privacy policy, so you better check that out before you share the message content.
What was special to the giver that he didn't share?
The giver did not share certain memories that held pain or traumatic experiences for the receiver. These memories were deemed too burdensome or damaging to share, and were instead kept secret to protect the receiver's well-being.
What is ARINC 629 what does it do exactly?
ARINC 629 is a multi-transmitter protocol where many units share the same bus.
What are the importance and benefits of mass communication?
Mass communication is a scientific way to share your message ideas feelings and demands which is included television,radio,newspaper,telephone and magazines... now a days modern world is so fast having no time to waste so it takes less time to deliver your message to your receiver...
What is communication and define its types?
the activity of conveying information. Communication has been derived from the Latin word "communis", meaning to share. Communication requires a sender, message, and an intended recipient, although the receiver need not be present or aware of the sender's intent to communicate at the time of communication; thus communication can occur across vast distances in time and space. Communication requires that the communicating parties share an area of communicative commonality. The communication process is complete once the receiver has understood the message of the sender. types of communication are Verbal & Non-verbal communication
Why text message?
people text message just for fun! you can also text message to share news or just for a conversation.
What is communication and what is the process of communication?
Communication is a process where verbal and non-verbal messages are used to create and share meaning. To understand the process of communication, you should first be familiar with the five main elements of communication which are: the source, the message, the channel, the receiver, and the effect. There are a lot of communication models which can show you how the process of communication goes (such as Lasswell's model and Berlo's model).
