Want this question answered?
A manometer is a device that is used to measure the pressure of a fluid. The U-shaped glass tube is partially filled with a liquid, usually mercury. The difference between the height of the mercury corresponds to the difference between the pressure of the fluid in the container and the atmospheric pressure.
-heavy liquid will try to fall down due to act of gravitational force. -thus heavy liquid will act pressure on fluid in tube -it will be problem in measuring accurate pressure So..
Laminar flow is smooth flow : all the molecules of the liquid are moving in the same direction. (but not necessarily at the same speed - it never is).
An air plane wing or anything that reduces drag like an arrow,dart, or even fish. Other examples could be the fins of dolphins, blood through arteries, water in a tube. Just remember that laminar flow is flow in which the fluid flows smoothly without much resistance. The fluid pretty much travels in straight or almost straight lines.
Gases expand or contract when heated or cooled. The main part of the thermometer has a 'large' bulb containing a gas connected by a hose to a tube filled with liquid. The expansion or contraction of the gas causes the liquid level to move this indicates the temperature.
yes,manometer is an instrument . It is used to measure pressure of liquid.
Inverted U-tube manometer is used for measuring pressure differences in liquids. The space above the liquid in the manometer is filled with air which can be admitted or expelled through the tap on the top, in order to adjust the level of the liquid in the manometer.
A double tube manometer measure pressure. Manometers use liquid in a column and balance it against the pressure that they are measuring.
What is a two liquid well type manometer is one of the three main types of manometers. This type is best applied to reading scales that are properly calibrated and in the right units.
Compound Manometer is an 'U' Tube manometer having 'T' joints at appropriate equal elevation in the columns of U tube manometer where the impulse lines are to be connected to measure Differential Pressure. T joint allows the use Two liquids simultaneously in the manometer. i.e. the liquid who's differential pressure is to be measured being lighter it will gauge at the top and a heavier liquid which does not dissolve with the lighter fluid will gauge at the bottom. Elevation difference in lighter liquid as well as heavier liquids gives their respective differential pressure. Both the differential pressure will be equal in terms of Pressure Units. Since two liquids are used simultaneously this type of U tube manometer is called Compound Manometer.
A manometer is a device for measuring pressures, especially the word is used for pressure meters that are constructed to use a liquid in a transparent U-tube. A peizometer is specifically about measuring pressures in ground water wells.
A manometer. Used to measure pressure.
The function of a manometer is to measure the pressure of a fluid, usually a gas or a liquid. It consists of a sealed tube filled with the fluid being measured, with one end open to the environment and the other end connected to the source of pressure. As the pressure changes, the fluid in the manometer rises or falls, allowing the measurement of the pressure.
E E. O'Brien has written: 'On the flux of heat through laminar wavy liquid layers' 'On the flux of heat through laminar thin films'
Liquid pressure is defined as the force all over area mathematically: P = F/A where" P is pressure with a unit of PASCAL F is force with aunit of NEWTON A is area wiht a unit of METER SQUARE
For a very basic explanation, a manometer measures the pressure differential between a closed pressure applied at one end and an open pressure at the other. For example. If you have a typical u-bend manometer and you apply an air pressure at one end, the liquid will raise correspondingly, as the pressure on the closed side increases more and more above the ambient air pressure. The amount it rises depends on the density of the liquid used and the diameter of the tubing. So basically a manometer uses the height of a liquid to translate the amount above ambient air pressure, which is considered zero, of your pressure source.
No because it blocks the airflow in your nose and that can kill you.