Compound Manometer is an 'U' Tube manometer having 'T' joints at appropriate equal elevation in the columns of U tube manometer where the impulse lines are to be connected to measure Differential Pressure. T joint allows the use Two liquids simultaneously in the manometer. i.e. the liquid who's differential pressure is to be measured being lighter it will gauge at the top and a heavier liquid which does not dissolve with the lighter fluid will gauge at the bottom. Elevation difference in lighter liquid as well as heavier liquids gives their respective differential pressure. Both the differential pressure will be equal in terms of Pressure Units. Since two liquids are used simultaneously this type of U tube manometer is called Compound Manometer.
what are the advantages of a u-tube manometer than a piezometer
A double tube manometer measure pressure. Manometers use liquid in a column and balance it against the pressure that they are measuring.
A manometer is a device for measuring pressures, especially the word is used for pressure meters that are constructed to use a liquid in a transparent U-tube. A peizometer is specifically about measuring pressures in ground water wells.
Manometer is a device that is being used to measure pressure. It uses alcohol because it has a low vapor pressure.
by u tube manometer
simple manometer differential manometer inclined manometer
http://www.komar.org/faq/manometer/
the most common type of manometer are u-tube type,inclined and the cistern type of manometer
To set up a manometer, first ensure that it is securely mounted in a vertical position. Fill the manometer with a fluid, typically mercury or water, making sure there are no air bubbles. Connect the manometer to the system you want to measure the pressure of, and then observe the height difference of the fluid levels in the manometer to determine the pressure.
Manometer
I think you're looking for U-Tube Manometer
A 2005 Dodge Caravan does not have a manometer.
Electrical manometer is an electronic manometer use to record pressures between two points. It is commonly used in recording pressure in bridges.
A manometer is used to measure pressure. A well-type manometer measures a singular height of pressure and is normally highly accurate.
Manometer.
air, fluids and very low pressures equal & unequal leg u tube manometer, cistern manometer, u tube manometer.
To effectively use a manometer to measure pressure, first ensure the manometer is properly calibrated and zeroed. Next, connect one end of the manometer to the system or device where pressure is to be measured. The other end should be open to the atmosphere. The difference in fluid levels in the manometer will indicate the pressure. Read the measurement from the scale on the manometer to determine the pressure accurately.