The plimsoll line is lower in salt water than in fresh
Probably not. The purpose of a plimsoll mark is to protect insurance companies that insure merchant vessels. To get a plimsoll mark you must build the vessel to a classification societies standards and endure continual inspections. Since the Calypso started life as a warship, warships do not have to conform to the same standards as merchant vessels, they are not classified by a society and thus have no plimsoll mark.
The forest constitutes everybody's life line. The plants release oxygen into the air, providing fresh air for all forms of life.
It usually means water.
A shoreline is where the land meets a body of water.
water line? half inch or three quarters
The plimsoll line is a reference mark painted on the bow of a ship. If the line is below the water level, the ship is overloaded. There are lines for when on fresh water and when on salt water.
Tropical Fresh
On the contrary: The English politician and reformer, Samuel Plimsoll, devised the Plimsoll Line to prevent the overloading of ships. Ships float higher on salt water, and lower on fresh water. So the Plimsoll Line, painted on the bow of a ship, indicates the mark past which the ship must not pass - or it would be overloaded.
Archimedes principle led to the Plimsoll Line, which is marks painted near the bows of a ship. Basically, a ship on salt water floats higher and can carry more cargo. While a ship on fresh water will float lower and can safely carry less cargo. Samual Plimsoll introduced the Plimsoll Line to solved the hazard of capsizing posed by overloading a ship.
The plimsoll line was invented in the 19th centary by a british man named Samuel plimsoll
the plimsoll line tells you when youve reached the loading limit on the ship(gross weight). Say its 20 000 tonnes, then youve displaced 20 000 tonnes of water (archemides principle). Where this equates to the water line on the hull is the plimsoll line. Variation due to water density and temperature will also be taken into account
We need the plimsoll line to show the legal amount of weight in case it has an overload and plus to show how high or low the water is to prevent sinking.
The Plimsoll Lines stopped owners overloading the ship, as it provided a 'load line' which could not be exceeded. i.e. when a ship goes to sea, the water line is never allowed to go above the plimsoll line.
The Plimsoll line was created to prevent ships from sinking at sea.
because it was invented by a man called Samuel plimsoll It has saved many lines, he deserves to be honored for this idea.
The Plimsoll line is there for safety's sake. It's to prevent overloading of a vessel.The Plimsoll line or Plimsoll mark is named for the 19th Century Englishman Samuel Plimsoll, who first suggested that it was necessary to have permanent line or mark on the hull of merchant ships to show the depth to which a vessel may be safely and legally loaded. This "load" line differs from the waterline, which shows where the unloaded vessel floats. The Plimsoll mark is important because if it is submerged due to overloading, it immediately shows that the vessel does not have enough freeboard (that part of the vessel that is out of the water) to be safe.
Plimsoll line?