faulty dmd and mainboard. replace mainboard. u can try squesing the projector. on bottom and topp. that can fix it for a while but ultimately u need to change the mainboard.
Leuconychia is evident as white lines or spots in the nail plate and may be caused by tiny bubbles of air that are trapped in the nail plate layers due to trauma. This condition may be hereditary and no treatment is required as the spots will grow out with the nail plate. It also means your nails aren't hard enough.
It has no reflection symmetry because the white diagonal lines are thicker on one side than the other.
parallel lines are used in the white house. The columns holding it up are parallel lines and the floor and the roof of a room are parallel planes as long as they are the same shape
10, A decagon has a maximum of five pairs of perpendicular lines, and a maximum of 5 parallel lines. however, this isn't in black and white it can have no pairs of line either perpendicular or parallel
a giftcard, the side of a box, a peice of paper, the screen of your computer, a post-it note, a window, a TV screen, a picture frame, as door , a square , a rectangle , a trapizoid , a white board , a black board , a parrallelgram ( a shape with 2 or more side that are parallel )
The Graphics Card is broken.
If its white it should work
i dont know dont u hahaha by P@☻!
Projector screen material can usually be fixed with white seamless paper. One might want to look at the material used in the original screen to preserve quality.
A video projector takes a video and reflects it off a mirror. The video is played on a screen that is a solid color preferably white.
Data can be shown on a large screen by using a projector attached to the computer. The projector throws the image onto either a white sheet attached to the wall, or onto a special projector screen. If, by a very large screen? (as in the question) a serial RS232 9 Pin cable can be attached between the computer and the large monitor/screen.
Yes, Bring the video cable out to the projector. You will need to bring the "RED & WHITE" out to speakers. Once you do that you will have a big screen, as big as your projector will allow. Good luck
In many cases a white sheet can be used as a screen. However, you may lose some of the crispness or detail of whatever you're attempting to project.
They are like big white screens, with rows of seating, and a projector showing pictures on the screen.
It really depends upon how true your wall is.A screen is going to be better,but if your wall works good enough for you then you save money.
If you used a green or red screen, whatever you are looking at being projected would be that colour. Like when you draw with colours you use white paper instead of coloured and when you do use coloured the colours you are drawing with do not show up as well as they would on white.
You can easily fix these by taking a look at the Video Cable in the back of your screen. If you wriggle it about it will work but if you can, see if you can unscrew it and then push it in a little bit more. Nothing is wrong with the power, just the Video Cable.