Yes!!!
Oils contains a metal shavings but it is not harmful...
Can be many things. Rod or bearing damage. I would have the oil pressure checked, and also probably pull the pan and see what is going on. Metal shavings in the oil is a very bad sign.
Serious engine wear.
your lookin at a new engine or engine work
Inside of your valve cover you will find a magnet. It's main purpose is to keep metal shavings from getting into your engine oil. If the shavings were to make it into your oil it can mess it up
It could be the reflection off of metal shavings that have worn off the gears.
Use a magnet. Metal shavings will be attracted to the magnet and pepper will not.
Why is there metal shavings in my 220K kilo Honda accord tranny? Do i repair or replace it?
Metal shavings are never good inside any transmission.
A lot depends on the TYPE of metal shavings you have in the pan. Larger "pieces" of shiny metal can often be broken rings and will be accommodated by oil burning, rough running, etc. Much smaller fragments can be rod bearings. Much depends on how the engine is running. More info on that would be helpful
air filters clean the dirt while oil filters strain the used oil eliminating the tiny metal shavings from the engine
not recommended you will only cause more damage
It means there is a problem. You should cease operation of your bike and bring it to a technician immediately.