Serious engine wear.
your lookin at a new engine or engine work
It means the transmission is failing. It is caused by gears grinding or rubbing.
It could be the reflection off of metal shavings that have worn off the gears.
It means that more likely than not that pump has had it, and needs replacing.
It means there is a problem. You should cease operation of your bike and bring it to a technician immediately.
That means the engine is TRASH... It has either lost some bearings are cam and lifters are worn out.
A lot depends on the TYPE of metal shavings you have in the pan. Larger "pieces" of shiny metal can often be broken rings and will be accommodated by oil burning, rough running, etc. Much smaller fragments can be rod bearings. Much depends on how the engine is running. More info on that would be helpful
It usually means you're going to have to do some work to your engine. Most of the time, the metal shavings are pieces of one or more of your bearings. Never a good sign. Unfortunately it usually means that the bearings have "touched down" against the crankshaft and there's serious trouble.
If you mean the brake master cylinder, then squealing might mean that you have a vacuum leak.
This code means that the fuel is to lean. You have problem with your oxygen sensor in the bank 1 (location: exhaust manifold).
This depends on what you mean by 'redwood'.1. If you mean Sequoia tree shavings, then no they likely are not toxic to horses and can be used since they are an evergreen. However you will want to make sure the horse does not have a reaction to any of the resins in them.2. If you mean shavings that are red colored and are most likely from cedar trees, then you should not use them as many horses have adverse reactions to them due to the oils and odor.
The Computer has detected a malfunction - The cheapest way to diagnose what is wrong take it to your nearest Auto zone and have them check the code for you. Most do it for free