compression
A thermometer measures the amount of thermal energy a material has. This thermal energy is related to the vibrational and rotational energy the particles in the material have. By using the thermometer to measure the temperature of a material you are, in effect, measuring the amount of energy the particles of that material have.
Yes
The expansion will be uncontrolled and a considerable amount of eddying will occur downstream. This results in a higher friction loss and a lower pressure recovery.
That's all because of pressure. The higher pressure, the higher the temperature should be to melt something. And the deeper you are in the earth, the higher the pressure becomes.
Their mechanical material properties are very similar with copper coming out marginally higher in terms of yield strength. This is the amount of stress required to make the metal deform permanently.
A flammable material has a lower flash point (100F or below) while a combustible material has a flash point of 100F or HIGHER. In other words, it's a lot easier for a flammable material to catch fire than a combustible one because of the minimal amount of energy (heat) required to get it going versus the higher requirement of a combustible material.
lower
Altius et latius (Higher/deeper and wider)
A thermometer measures the amount of thermal energy a material has. This thermal energy is related to the vibrational and rotational energy the particles in the material have. By using the thermometer to measure the temperature of a material you are, in effect, measuring the amount of energy the particles of that material have.
Bigger = deeper Smaller = higher
the deeper it goes, the higher the preassure is
Yes
A gas that had a higher density than oxygen
The question is actually wrong, they can both have the same resistance if configured differently, the real question should be which has a higher resistivity which is the electrical resistance found in a standard amount of each material. In this case Manganin has a higher resistivity than copper.
Kerala Higher Secondary results can be downloaded from the below website. keralaresults.nic.in
Higher
what do you mean how. obvouisly they sell it to a buyer after they have manafactured it, then the buyer cuts it with cutting agencies to get a bigger amount, that results in the buyer getting higher profits