Want this question answered?
Insrt key and turn to first settingt leave it there for about 15 min to allow computer to reset turn key to off position then turn key on to start car
The check mark is part of the normal keyboard characters.It is hidden in the letter V.When you want √ just press and hold the Option key before you press the v key.√ See!
remove wheels knock studs out with a hammer insert new studs from the back side of rotor place a thick flat washer over the the sud against the front side of rotor using the wheek nut, tighten wheel nut which will pull stud back into rotor until seated remove wheel nut replace wheels if the suds to be replaced are on the rear, you will need to remove brake caliper and then remove rotor from vehicle the rear rotor is a combined disk brake and drum brake for the emergency brake this will come off with a wheel puller or by knocking with a hammer onece removed knock broken suds out then insrt new ones. can then use a hammer to seat new ones reinstall rotor and caliper. replace wheel