It depends on the style of timing cover you have. The older style mounts from the inside and has a lip to rest against in the hole. The newer cover has a larger outer hole for a flange style seal that goes in from the front or outside. The seal has a 3/8 inch flange on the seal that rests against the outside of the cover.
The timing chain is inside the passenger side of the engine.The timing chain is inside the passenger side of the engine.
There are two parts to the speed sensor, one is located at the bottom of the timing chain cover, this is the sensor that has the electrical harness plug into it and is on the outside of the timing chain cover. The other part is more complicated and this is the sensor located inside the timing chain cover and is like a magnet and its plugged in a hole on the lower timing chain gear. I replaced the magnet sensor on a 1988 buick riviera, the one that is located inside the timing belt cover, it is a pain to get to it, once you remove the timing belt cover you have to remove the timing chain and the timing chain sprockets,, the sensor is located behing the timing chain lower gear so you have to remove the gear and the sensor plugs into a hole on the gear itself. The way it works is like this,,,the magnet that is located on the lower gear inside the timing chain cover turns and when it turns it passes trough the sensor located on the outside of the timing gear when they meet it creates a electrical pulse read by the computer and it tells it the speed of the engine.
H27A timing chain installation
Inside the front of the engine, driven by the timing belt on a 2.4L and the timing chain on a 2.7L.Inside the front of the engine, driven by the timing belt on a 2.4L and the timing chain on a 2.7L.
Inside the engine, driven by the timing chain.Inside the engine, driven by the timing chain.
Remove the exhaust manifold. This lets you pull it out. Also, you have to remove the timing cover. The pump is driven by the timing chain. You have to remove the timing cover and timing chain tensioner to get the pump sprocket out of the chain.
timing chain is inside the timing chain cover which is located between block and water pump. the water pump mounts to the front of timing case There is a cover that is behind the water pump... The timing chain is under that cover.
The timing chain is inside the passenger side of the engine.
Chain, inside the block.
It is inside the front of the engine. On a 3.5L it is driven by the timing belt. On a 2.7L it is driven by the timing chain.It is inside the front of the engine. On a 3.5L it is driven by the timing belt. On a 2.7L it is driven by the timing chain.
Yes, the serpentine belt runs the peripheral components on the engine. The timing chain is inside of the engine.
Alot. The time is needed to expose the timing chain (a lot of other parts in the way) and being sure it is installed properly. Improper installation can be fatal to your motor.