0
You will need a 30mm socket or wrench. First, pull straight up on the 4 rubber spark plug seats (the things with wires running out of them). Warning, if these wires are older they may break off while you are pulling on them, leaving part of the connection down the tube that the spark plugs are in. Use a long nosed needle nose pliers to remove the connection IF the wire seats break off. You do not need to remove the spark plugs.
After getting the 4 rubber spark wires out of the way, use a 30mm socket or wrench to remove the 4 nuts. Loosen a small amount at a time on each nut, but from the outside 2 then inner, to avoid damaging the threads and having a tremendous problem on your hands. Disconnect the 2 rubber hoses on the right, and pull the plastic unit on the left side up and out of the way carefully.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you change exhaust gasket on 96 jeep Cherokee sport?
with tools.
How to change the Valve cover gasket on a 1997 Saturn sl2?
With tools
How do you change the valve cover gasket on a Toyota Rav4?
Knowledge, tools and pizza
What do you need to change a thermostat on a Ford truck?
Tools a new thermostat and gasket and coolant
How long does it take to change head gasket on a dodge?
It takes between 6 and 8 hours to change the head gasket on a Dodge. The actual time will vary based on the skill level of the mechanic and the availability of tools.
What tools are needed to change the oil pan gasket 2004 Cadillac Deville?
Jack-up, wrench, anyway, it's very difficult to change it
What hand tools do you need to change rear brake pads on 1999 Toyota Camry?
I believe you need 17 mm box wrench for that.
How do you change out the bottom head gasket on a 95 Ford Contour?
There is no bottom head gasket. There is just a head gasket. One gasket for each head. The intake and exhaust manifold must be removed. Then the head is removed. This is a major repair, requiring skill, knowledge, and the proper tools. Take it to a professional.
How do you change head gasket on Pontiac grand am 3.4?
But a new gasket. Using the appropriate tools remove cylinder head and all attached items according to manufacturers instructions. Remove existing gasket and clean cylinder block and head. Fit new gasket according to instructions and reattach removed items.
How do you change out cv joints in 1989 Toyota Camry le 6 cl station wagon?
Let a professional do it, he will need specialized tools to reinstall the CV joint.
Does it require to have a shop change the head gasket on the 1977 Datsun 280z?
no. if you get the proper tools, Hayne's manual, and work space, you can do it. However it is not easy or can be done fast. You also need a new head gasket (head gasket sets are your best bet) and someone who has done it before to help
How long would it take to drop the oil pan to change the gasket on a 2000 contour?
having all the required tools and spares available, no more than an hour
