Tools a new thermostat and gasket and coolant
Need make, year, model, etc.
Replacing the thermostat in a 2000 Ford Focus SE wagon is very easy to do. First the radiator hose will need to be disconnected from the thermostat. After the hose is drained and disconnected, the thermostat can be removed by taking the two bolts off.
do i need to change the manifold when replacing thermostat
The thermostat on this particular vehicle is located on the right side of the engine. It is on the back of the engine block so use caution if you need to change it.
No
all you need to change the thermostat is a #25 trox driver- there are three screws 2 at the top and 1 on the lower left side
You will need to change it out. The bearing is failing.
The thermostat for a 6 cylinder Ford pickup is in the top radiator hose inlet. The hose and inlet need to be removed to install the thermostat..
NO
Yes
To change the thermostat, you first need to get a new one. Then you can take it out and replace with the new one.
Need to know engine size and year.