If you want to disable the "auto" headlight function and I just did this today and worked so good and ideal. Its so easy. Just replace your low beam hot wire (mine wire was purple) with one that was spliced off of your fog light (that wire was purple too, I believe). Ok, so once you do that, the only way to turn on your headlights is when your fog lights are on. So if your fog lights are off then your headlights are too. Before I did this config today, I would have my fog lights on all the time with my head lights anyway. But yeah, that's the catch if you want it easy. Another thing I did to was buy a set of 2 low/high beam camaro harnesses (male and female ends) from eBay. It was only $20. I used the harnesses for what I spliced (from the fog light) to be connected to the extra "male end" harness connector while leaving the original "male end" harness connector next to it so I could easily go back to stock config without re-splicing anything.
"http://wiki.answers.com/Q/1984_camaro_berlinetta_dash_turns_off_when_i_turn_on_the_headlights"
Turn off engine. Depress Emergency Brake. Turn on engine. The lights will not turn on until the E-Brake is released. Get in the habit of setting the E-Brake and you will have less of an issue with the auto headlights. I don't think there is an easy way to bypass the auto headlights entirely. The headlight switch is essentially, "just for show."
There are a couple of different times when you'd turn off your headlights. You'd turn off your headlights when the car is off for example.
The headlights should turn on and off automatically depending on which setting you have your switch set at. The switch is located on the turn signal lever. I always leave mine on auto.
if you have the owners manual it tells you how to change (turn off) the auto lights on setting basically turn the light control knob
do the headlights come on automatically or manually, if manually turn off
how do i turn off the headlights of my toyota 4 runner 2000 while the car is off?
Correct
Firstly, turn the ignition on but don't start the engine, then turn the headlights on, then off, then turn them back on, then off again. (so twice on, twice off) the car should beep at you twice indicating this function has been switched on. To switch off, repeat the same steps above and the car will only beep once.
You have to go to the dealer and ask them to turn them off, otherwise they leave them on as running headlights. They will do this for free.
No, the 98 Camaro is when Chevy started switching things up, they headlights aren't the in cased bulbs for headlights they are now a 9000 type bulb such as a 9005 I believe is what 98 Camaro's take for headlights. The only way I could think it was possible is if you replaced the headlights, hood, fenders, bumper, and I'm not sure then if it would still work. Those two years are the two different 4th generation Camaro's made.
I have a 2002 Chrysler Sebring convertible. If you turn off the ignition and remove the key while the headlights are on, then turn off the headlights, the headlights will stay on for 30 seconds and turn off. You can avoid this by turning the lights off before you turn off the car or by switching them on and off again.