.....what about it? There is one. Dealer has premolded ones also
With tools
25-35 bucks
Remove the valve cover.....scrape off old gasket.....clean gasket surface on valve cover....apply gasket sealent to valve cover gasket surface.....set gasket in sealent.....reinstall valve cover.
Replacing the valve cover gasket on a 2002 Saturn Vue involves several steps. First, you'll need to disconnect the battery and remove any components obstructing access to the valve cover, such as air intake hoses and ignition coils. After removing the valve cover bolts, take off the cover, clean the surfaces, and replace the old gasket with a new one. Finally, reassemble everything in reverse order, ensuring everything is properly tightened and connected.
Replace the valve cover gasket.
To change the valve cover gasket on a 2002 Saturn SL1, first, disconnect the negative battery terminal and remove any components obstructing access to the valve cover, such as the air intake duct. Next, unbolt the valve cover, carefully lift it off, and remove the old gasket. Clean the mating surfaces thoroughly before placing the new gasket and reassemble everything by reversing the disassembly steps, ensuring to torque the bolts to the specified settings. Finally, reconnect the battery and check for leaks.
Gasket that goes between head and valve cover to prevent leaks
The valve cover gasket, on a 2004 Jeep liberty, can be found by removing the valve cover. Peel the gasket off of the head and replace with a new gasket.
You can use a High temp RTV type sealer for your saturn valve cover. Use Permetex Red or Grey for the best seal. make sure both surfaces are clean, and dry.
Assuming you mean "valve cover gasket", the gasket seals the valve cover to the head so as not to leak oil.
Yes. The head gasket forms the seal between the engine block and the head(s). The valve cover gasket seals the gap between the valve cover and the valve train it is covering.
Begin by removing the valve cover from your 1995 Dodge. Remove the valve cover gasket and clean the surface. Put the new gasket on and return the valve cover to its original position.