You can order a replacement motor through a local HVAC supply company in your area. You can also contact the furnace manufacturer about a recommended source for parts. You can order online, too: www.midwesthvacparts.com
To add the sae 10 non detergent oil to your furnace blower motor you will have to open the motor section.
flame sensor
Replace blower motor it's burned up.
This operation requires a licensed electrician. Not recommended to a DIYer.
Furnace blower motors are easily found at HVAC installers and repair centers. However, without proper knowledge, a customer should not try to fix this, it can be dangerous.
It should be called the auto HVAC blower motor resistor wire harness. Goes from the auto climate blower motor resistor to the blower motor.
The A/C systems blower motor on a 1993 Acura Integra is located behind the glove box on the passenger side of the vehicle. Replacement requires removal of the glovebox, lower passenger dash, and covers. The blower motor is located next to the evaporator, and held by several mounting screws. Just unmount and unplug the blower motor to install the replacement unit.
It depends on the rating of the furnace. There should be a plate or sticker somewhere on the furnace that shows the rating. If you are just powering a blower motor the rating will be lower than if you have an electric heating element.
the blower motor resistor is broken, get a replacement.
The draft boost blower for the Fasco Motor is available as a furnace repair replacement part. It has single speed at 3000 RPM with sleeve bearing. This blower is for heaters, oil and gas furnaces. It operates on 115 volts with 0.7 amps. There are also different kinds of capacitors that can be replaced. The 10m - 370 volt, oval motor run capacitor or the 440 VAC, dual round capacitor can be used as replacements.
Is there a grant for furnace replacement in Michigan?
Yes, you can melt the heat exchanger and start a fire that way