0
What else can I help you with?
How can I replace the main drum bearing on a Clark's cement mixer?
To replace the main drum bearing on a Clark's cement mixer, first disconnect the power source and ensure the mixer is stable. Remove the drum by unbolting it from the frame, then carefully take off the old bearing, which may require some force or a bearing puller. Clean the area, install the new bearing in the same position, and reattach the drum securely. Finally, check that everything is aligned properly and test the mixer before use.
How to replace the main drum bearing on a Clark's ccm125c pre 1999 cement mixer?
To replace the main drum bearing on a Clark's CCM125C cement mixer (pre-1999), first, disconnect the mixer from power and remove the drum by unscrewing the bolts that secure it to the frame. Once the drum is off, carefully extract the old bearing from its housing, using a bearing puller if necessary. Clean the bearing housing, then press or tap the new bearing into place, ensuring it is seated correctly. Finally, reassemble the drum onto the mixer, securing it with the bolts, and test the operation before use.
Where can I get a drum mixer for soil?
BASCO, an industry leader in industrial packaging and container products, supplies customers with top-quality drum mixers and other drum and pail ...
Should I get an Alesis DM5 pro electronic drum kit or a Yamaha DTXPLORER?
It depends because a DTXPLORER is a drum set and from what I have looked up a Alesis DM5 is a drum Mixer
Which devices are used to to stir in industries?
On industrial level, there are about 30 different types of mixers/stirring machines. A few of them are: V blender, paddle mixer, counter-rotating mixer, drum blender, banbury mixer.
Can I run a mixer through my powered mixer for drum mics?
Yes. In fact, I would recommend doing this instead of just running the mics through your band's powered mixer. That way, all your drum sounds (pre-mixed) will fit into just one input on your band's powered mixer. It takes about a minimum of 6 or 7 mics to capture a drum kit properly and that's a hell of a lot of inputs to be using on your band's P.A. Just run the mics through your own mixer, then run your mixer's "Main 1" output to your band's P.A. input. Use a balanced cable. Also, if the mixer that you are using is unpowered, then get yourself a couple powered monitors to run directly off of it so you can have some monitoring without using one of the the P.A. monitors. If your drum mixer IS powered, however, just get yourself some speakers and you've got yourself some monitors. In a nutshell, I recommend getting a small powered mixer for your drum mics (something with 100W minimum) with unpowered monitors running right off of it (use the "Main 2" output). Connect the mixer's "Main 1" output to your band's P.A. system for the final mix. But remember, if you do it like this, you have to dial in a good mix on your drum mics through your own little mixer because the sound guy will only be able to adjust the volume of the drum kit AS A WHOLE through the main P.A. system. This is what I do and it works very well.
Which KitchenAid mixer would you recommend?
There are many factors to consider when shopping for a mixer. There are things like the size and type of mixer you are wanting. There is also choices as to whether you are going to be baking allot a home mixer will do fine, but if you are going to be baking more often or baking greater quantities you might want to consider a commercial grade mixer.
What is the advantage of buying the karaoke mixer for the Singing Machine system?
The Karaoke Mixer for the Singing Machine will allow you to join in on your favorite songs with the Mixer's built in 13 key synthesizer or its built in drum pads. You can play right along with your favorite songs.
Where online can one purchase a mixer stand?
Upon extensive research there is only one place that was found to sell a mixer stand and that is at Global Industries. If one is wanting to purchase a stand mixer they are widely available on sites such as Sears, The Bay, Overstock, Amazon or eBay.
What is the drum head called?
The technical term for the head of a drum IS drum head. If there is another term i do not know it.
How does Toontrack EZ Drummer work?
The Toontrack EZ Drummer is a drum software synthesizer. EZ Drummer is based around 7,000 samples of real drum sets. The software also contains a mixer that allows the user to adjust the microphone volumes on the drum kit. The software also comes with 8,000 MIDI drum loops that are volume adjustable and tempo synchronized.
What job does the ear drum do?
I dont know what the ear drum does that is what i am finding out now
