We don't see gold wire used in microwave ovens. Gold wire is super expensive, and we can use copper more easily and for less money.
Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.
If the accessories were designed by the manufacturer of the microwave cooker there will be no problems, no matter what they are made of. Its metal objects that the cooker was not designed for that are problems, especially foil or wire as they are high resistance and can cause fires.
If your ring is gold and you gold wire and if your ring is platinum ring then using platinum wire...
Turn it in for money $$$$
Toats xoxoxox
They are both conductive materials. Both of them are metals. Gold tends to be a better conductor than copper or aluminum, usually used in electrical wire.
Because in superconductor wire, the wire used is gold as it has a low resistance and a high current value, and gold is not found in al huge abundant due to which it is expensive.
10 Guage Wire Will Handle 30 Amps. Most ovens require 50A, so no.
It depends on how thick the gold wire is. Gold is extremely ductile.
It has to be around 6-8 carats, but its near impossible to get the gold out of the pins and wire
- gold has an yellow color - gold is expensive - gold is very malleable - gold is very ductile - gold is not corroded - gold is used for jewelry - gold is also used in electronics - gold was used in dentistry - colloidal gold was used in medicine
No, 10 gauge wire requires the use of a 30 amp breaker. A 20 amp breaker is only used on 12 gauge wire.